Filter
Top Products
49
7
SET MODE
Q6 CARRIER Frq (SSB only)
This item adjusts the carrier frequency (BFO frequen-
cy), allowing you to change the audio characteristics.
Selectable values are –200 to +200 Hz in 10 Hz steps.
USB
The default is 0 Hz.
Q6 RPTR TONE (FM only)
This item selects a subaudible tone for FM-T mode
operation to access a repeater. There are 50 tones
available from 67.0 Hz to 254.1 Hz (see table at
right).
•Available subaudible tones Unit: Hz
The default is 88.5 Hz.
FM
Q4 CW PADDLE (CW only)
This item adjusts the CW paddle type. Four selec-
tions are available.
•n : normal (for electronic keyer use)
•r : reverse (for electronic keyer use)
•buG : When using the electronic key, key down
produces a “dash,” releasing the key auto-
matically produces a “dot(s).”
•oFF : Turns OFF the electronic keyer (for
straight key use)
•ud : For using the microphone’s [UP]/[DN]
keys instead of the CW paddle.
The default is “n,” normal.
CW
Q5 KEY SPEED (CW only)
This item adjusts the CW key speed. The key speed
can be selected from 6 to 60 wpm.
The default is 20 wpm.
CW
Q6 RATIO (CW only)
This item adjusts the CW key ratio (or weight). The
ratio can be selected from 2.8 to 4.5.
The default is 3.0.
CW
Q7 TONE SQL (FM only)
This item adjusts sets a subaudible tone for tone
squelch use. (the same subaudible tone frequencies
as for repeater operation are available—see above).
The default is 88.5 Hz.
FM
67.0 79.9 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1
69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6
71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8
74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3
77.0 91.5 107.2 127.3 151.4 167.9 183.5 199.5 225.7 254.1
Q5 ANTI VOX (SSB/AM/FM only)
This item adjusts the ANTI-VOX gain for the VOX
(voice activated transmit) function.
USB
The default is 5.