Filter
Top Products
24
4
RECEIVE AND TRANSMIT
This function automatically attenuates beat tones,
tuning signals, etc., even if they are moving. The
automatic notch filter functions in SSB, FM and AM
modes.
➀Select S4 (DSP menu).
•Push [DISPLAY] 1 or 2 times when M or G is displayed.
•Push [MENU] one or more times to select S4.
➁Push [(F-1)ANF] to toggle the automatic notch filter
ON and OFF.
•“DSP” and “ANF” appear when the function is ON.
D NR (Noise Reduction) function
This function reduces noise components and picks
out desired signals which are buried in noise. The
received AF signals are converted to digital signals
and then the desired signals are separated from the
noise. The noise reduction function is available for all
operating modes.
➀Select S4 (DSP menu).
•Push [DISPLAY] 1 or 2 times when M or G is displayed.
•Push [MENU] one or more times to select S4.
➁Push [(F-2)NR] to toggle the noise reduction func-
tion ON and OFF.
•“DSP” and “NR” appear when the function is ON.
➂Push [(F-3)NRL] to toggle the noise reduction level
indication ON and OFF.
➃Rotate the [M-CH] control to set the noise reduc-
tion level.
•Set the control for maximum readability. Deep rotation
results in audio signal masking or distortion.
☞ NOTE:Pushing [(F-3)NRL] automatically turns the
noise reduction function ON, however, the trans-
ceiver maintains the ON/OFF condition when
pushing [(F-2)NR].
D ANF (Automatic Notch Filter) function
■ DSP Functions (may require an optional unit depending on version—see p. 61)
DSP
CH
VFO A
P
O
S1
5
5379204060dB
USB
BLANK
ANF
S4
ANF
NR
NRL
DSP
CH
VFO A
P
O
S1
5
5379204060dB
USB
BLANK
NR
S4
ANF
NR
NRL
S4
LEVEL 8
NRL