Filter
Top Products
Setting Up the LitePro
10 LitePro 560/570 User’s Guide
•
If you have an Apple PowerBook computer
, you’ll need the
video-out cable that came with your PowerBook and one of
the Mac adapters that came with the LitePro. Connect the
video-out cable to the video-out port on the back of the
PowerBook. Connect the Mac adapter to the video-out cable.
Connect the LitePro cable to the Mac adapter as shown below.
If you have an Apple PowerBook Duo computer
, you must have
a DuoDock adapter (which provides a video out connector).
You’ll also need one of the Mac adapters that came with the
LitePro. Follow the instructions for connecting a PowerBook.
Tighten the thumb screws on all cable connectors to ensure
proper grounding.
9.
If you want to connect a second computer, connect it to the
LitePro’s “RGBHV” connector with a 15-pin cable. (The RGBHV
connector is in the “
SOURCE 2
” area of the connector panel.)
Figure 7. Connecting a Macintosh PowerBook
power switch
“Monitor” end of
LitePro cable
“VGA” end of
LitePro cable
video out
cable
Mac adapter
CONNECT.FRA Page 10 Tuesday, January 28, 1997 9:53 AM