Insignia NS-19RTR TV DVD Combo User Manual


 
24
NS-19RTR 19" DVD Triple Combo
www.insignia-products.com
4 Press the or button to select MPAA RATING, then press the
ENTER button.
5 Press the
or button to select a rating that you want to block.
You can select:
G–General audience
PG–Parental guidance suggested
PG13–Children 13 years of age and older
R–Restricted, adult supervision recommended for children
under 17 years of age
NC-17–No one under 17 years of age
X–Adults only.
6 Press the ENTER button to select BLOCK or VIEW. If you block a
rating, that rating and all ratings above that rating are blocked.
7 Press the SETUP button.
Changing your access code (password)
To change your access code:
1 Press the SETUP button.
2 Press the
or button to select V-CHIP SET UP, then press the
ENTER button.
3 Use the number buttons to enter your access code (password). If
you have not set up an access code, enter 0000.
4 Press the
or button to select CHANGE CODE, then press
the
ENTER button.
5 Use the number buttons to enter a new four-digit code in the NEW
CODE box, then re-enter the new four-digit code in the CONFIRM
CODE box. The V-CHIP SET UP screen appears.
6 Press the SETUP button.
Note
If power fails or you unplug your DVD combo, the your access code
is erased. Use the default code (0000) to set up another access
code. If you forget your access code, turn off and unplug your DVD
combo for about 10 seconds to restore the default code.