Filter
Top Products
34
NS-19RTR 19" DVD Triple Combo
www.insignia-products.com
4 Press the REC button, then press the or button to select the
program you want to adjust.
5 Press the REC button one or more times to select the new
beginning and ending time you want. Each time you press the
button, the time changes by 10 minutes. If the recording is in
progress, only the ending time changes.
6 Press the ENTER button to confirm the setting, then press the
SETUP button to close the menu.
Finding a program on a recorded videotape
After a timer recording finishes, you can search the beginning of the
recorded program(s).
To find a program:
1 Press the SETUP button.
2 Press the
or button to select USER’S SET UP, then press
the ENTER button.
3 Press the
or button to select AUTO RETURN, then press
the ENTER button to select ON.
When all the timer recordings are complete, your DVD combo
rewinds to the beginning of the recorded program(s) and turns
itself off.
To cancel AUTO RETURN function:
1 Press the SETUP button.
2 Press the
or button to select USER’S SET UP, then press
the ENTER button.
3 Press the
or button to select AUTO RETURN, then press
the ENTER button to select OFF.
Auto rewind and eject feature
When your DVD combo reaches the end of a videotape, it
automatically rewinds and ejects the tape. This feature is active when
REPEAT PLAY is set to OFF. This feature is not active during timer
recordings of OTRs.
Note
If you want to cancel your changes and return to the original start
and end times, press the PAUSE–SLOW button.
Tip
Your DVD combo stores the setting for this function even if a power
failure occurs.