Insignia NS-32E570A11 Flat Panel Television User Manual


 
8
NS-32E570A11 Insignia 32" LED-LCD HDTV, 1080p
www.insigniaproducts.com
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries align with the + and –
symbols in the battery compartment.
3 Replace the cover.
Aiming the remote control
To aim the remote control:
Point the remote control toward the remote
control sensor on the front of your TV.
Using the remote control holder
Your TV comes with a remote control holder you
can put the remote control in when you are not
using it.
Programming your existing universal remote
control to work with your TV
You can operate your Insignia TV with a new or
existing universal remote control.
To program a universal remote control:
1 See the table below for common codes. If you
have problems programming your remote or
need a different remote control code, visit
www.insigniaproducts.com for the latest
remote control code information.
Codes for other remote controls are available
online at:
www.insigniaproducts.com
Warnings
Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is depleted.
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Notes
Do not expose the remote control to shock.
Do not expose the remote control to liquids and
do not use the remote control in an area with
high humidity.
Do not place the remote control in areas of high
heat or direct sunlight. The heat may warp the
battery case.
The remote control may not work correctly if
sunlight or bright light is shining on the remote
control sensor. To correct this problem, move
your TV or use the remote control closer to the
remote control sensor.
Insignia TV codes for universal remote controls
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makes and models
Philips PHDVD5,
PH5DSS,
PMDVR8, PDVR8
RCA
RCU807
One for All
URC-6690
Sony
RM-VL600
115 135 0464
8043
Set-top box makes and models
Comcast
M1057
Dish Network
VIP508, VIP622
Motorola
DRC800
TIVO
Series 3, HD
DirectTV
RC23
0463 720 0463 0091 10463
Tips
The brand name is often visible on the front of
the universal remote control, and the model
number is often visible on the back.
If your universal remote control isn’t listed on
the chart, refer to your universal remote
control’s instructions and try codes for the
brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith. You may need to try several
codes before finding a match.