49
Insignia 42" 1080p LED TV
www.insigniaproducts.com
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
Inputs
Outputs
Audio
Power
Miscellaneous
One or more channels
do not display.
• Make sure that the channels are not blocked. See
“Setting parental control levels
” on page 33.
• Make sure that the channels are not hidden. The
channel may have been deleted from the channel list.
You can tune to the channel by pressing the number
buttons or you can add the channel back to the channel
list. See “Hiding channels” on page 29.
• If you are using a cable or satellite box, use the remote
that came with that box to change channels.
• Make sure that you have the correct input selected to
view channels from the cable or satellite box.
• If you are using an antenna, the digital channel signal
may be low. To check the digital channel signal
strength, see “Checking the digital signal strength” on
page 30.
Password is lost.
•Enter 9999 to access parental controls, then set a new
password. See “Setting or changing the password” on
page 31.
Some settings cannot
be accessed.
• If a setting is grayed, the setting is not available in the
current video input mode.
TV cabinet creaks.
• When the TV is in use, the temperature rises naturally
and may cause the cabinet to expand or contract which
can cause a creaking noise. This is not a malfunction.
Control buttons do
not work.
• Make sure that the Button Lock option is set to Off.
See “Locking control buttons” on page 32.
• Unplug the power cord, wait a few seconds, then plug
the cord back in and turn on your TV.
TV keeps turning off.
• Make sure that the sleep timer is not turned on. See
“Setting the sleep timer” on page 38.
Without stand
38.5 × 24.28 × 1.38 in. (97.8 × 61.7 × 3.5 cm)
28.2 lbs. (12.8 kg)
With stand
38.5 × 26.2 × 9.25 in. (97.8 × 66.5 × 23.5 cm)
30.9 lbs. (14 kg)
Screen size measured
diagonally
42 in.
Display type LED
Panel 60 Hz vs.120 Hz 120Hz
Display resolution 1080p
Panel resolution 1920 (H) × 1080 (V)
Aspect ratio 16:9
Contrast ratio (typical)–panel 3000:1
Dynamic contrast ratio–
list value
70000:1
Brightness (center typical)
cd/m2
350 nits
Comb filter 3d y/c digital
Response time 6.5 ms
Horizontal viewing angle 178
Vertical viewing angle 178
Problem Solution
HDMI 1080p, 1080i, 720p, 480p, 480i
Component video 1080i, 720p, 480p, 480i
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
HDMI
3 (side)
E-EDID compliant
HDCP compliant
Component video 1 (back)
Composite video 1 (back)
Shared audio (component
and composite)
Yes
Shared with Component Y
S-Video No
PC/VGA 1 (back)
3.5mm PC audio input 1 (side)
DVI 1 (side) (HDMI 1/DVI jack)
USB
1 (side)
Support JPEG and firmware upgrade
Video No
Analog audio/headphone 1 (side)
Digital audio 1 optical (back)
WiFi No
Ethernet No
Speakers
Number: 2
Watts per channel: 10W
Power consumption
On: 80W
Standby: <1W
Power input 120V/60Hz
OSD languages English, French, Spanish (all models)
INlink Yes
Game Mode Yes
ENERGY STAR qualified Yes
Internet connectable No
TV base screws M4 type (12 mm length) (4 pcs)
V-Chip (version 2.0) Yes
Sleep timer Yes
Channel labeling Yes
VESA mount (mm)
(horizontal × vertical)
400 × 400
Note
The length of the wall-mount screws vary depending on the
wall-mount bracket you purchased. See the instructions that
came with the wall-mount bracket for screw lengths.