Filter
Top Products
13
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
1 Turn off your TV and all connected equipment.
2 Connect the cable from the cable wall jack to
the cable-in jack on the cable box.
3 Connect an A/V cable (not included) between
the AV IN 1 Y/VIDEO and AV IN 1 R-AUDIO-L
jacks on the back of your TV and the composite
video and audio out jacks on the cable or
satellite box.
4 Turn on your TV, then turn on the cable or
satellite box.
5 Go through the setup wizard on page 20.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Turn off your TV and all connected equipment.
2 Connect the cable from the cable wall jack to
the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not included) between
the ANT IN jack on the back of your TV and the
coaxial out jack on the cable or satellite box.
4 Turn on your TV, then turn on the cable or
satellite box.
5 Go through the setup wizard on page 20.
Note
The AV IN 1 Y/VIDEO (composite video) jack shares
the audio jacks with the COMPONENT IN 1 jacks.
Back of TV
Cable or satellite box
A/V cable
Cables are often color-coded
to match color-coded jacks.
Note: The yellow connector
on the AV cable plugs into the
bottom green Y-VIDEO jack.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Cable or satellite box
Back of TV
Coaxial cable