Filter
Top Products
8
Insignia NS-20CLTV 20" Combo DVD/LCD TV
www.insignia-products.com
Connecting to video sources
Connecting to an antenna or cable/satellite
receiver
To connect an external antenna or cable/
satellite receiver:
1 Remove the port cover on the back of
the TV (1).
2 Connect the antenna terminal from an
antenna or cable/satellite receiver (3) to the
antenna input jack on the TV (2).
3 Press the INPUT button and the
buttons to set the TV’s signal input to TV.
Connecting to a standard video source
Your TV supports multiple video source inputs.
For temporary or easy-access video
connections, use the side jacks (AV2). For more
permanent connections, use the rear jacks
(AV1).
To connect a standard video source to
AV1 jacks:
1 Connect an RCA video cable (2) to a
standard video source (1) and the back
VIDEO jack (5).
2 Connect RCA audio cables (4) to the
source’s audio output jacks and the upper
AUDIO L and R jacks on the back panel (5).
3 Press the INPUT button and the
buttons to set the TV’s signal input to AV1.
To connect a standard video source to
AV2 jacks:
1 Connect an RCA video cable (6) to a
standard video source (1) and the side
VIDEO jack (8).
2 Connect RCA audio cables (7) to the
source’s audio output jacks and the side
AUDIO L and R jacks (8).
3 Press the INPUT button and the
buttons to set the TV’s signal input to AV2.
INPUT
RF
INPUT
VGA
OUTPUT
AUDIO
VGA INPUT
2
1
3
R
C
B /
P
B
Y
AUDIO
L
R
C
R /
P
R
INPUT 3
S-VIDEO
AUDIO
VIDEO
L
INPUT 1
VIDEO
L
R
AUDIO
INPUT 2
2
3
4
5
1
6
7
8