Filter
Top Products
13
www.insigniaproducts.com
Connecting an audio amplifier
To connect an audio amplifier:
• Connect an audio cable to the AUDIO OUT
L and R jacks on the back of your TV and to the
AUDIO IN jacks on the amplifier.
Turning on your T V for the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, TV signal source, and the channel list.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See
page 7 for details).
• Connected an antenna, cable TV, or satellite
TV. (See pages 8 and page 9 for details.)
• Connected the power cord. (See page 8 for
details.)
2 Press (power) to turn on your TV. The Choose
your menu Language screen opens.
3 Press or to highlight English, Français, or
Español, then press ENTER to confirm your
selection. The Choose your TV source screen
opens.
4 Press or to highlight Antenna, Cable, or
Cable/Satellite box (if your cable TV uses a box,
select Cable/Satellite box), then press ENTER. If
you chose Antenna or Cable, your TV
automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
When the scan is complete, the Setup Wizard
closes automatically.
Back of TV
Audio Amplifier
Note
You can change the menu language or scan for
channels at a later date. For more information, see
“Selecting the menu transparency” on page 29 or
“Automatically scanning for channels” on page 18.
English
Français
Español
Choose your TV source
Antenna
Analog Channels
Digital Channels
0
0
Cable
Cable/Satellite box
Scan for channels
MOVE
SELECT PREVIOUS EXIT
ENTER
OK
MENU EXIT
Select Antenna If using an antenna for standard or HD TV