Filter
Top Products
30
www.insigniaproducts.com
7 Press ENTER to confirm.
8 Press MENU to go to previous menu or press
EXIT to close the menu.
Restoring default settings
To restore default settings:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
2 Press VOL or VOL to highlight SETTINGS,
then press CH or ENTER. The Settings menu
opens.
3 Press CH or CH to highlight Reset to
Default, then press ENTER or VOL to confirm.
4 Press MENU to go to the previous menu or press
EXIT to close the menu.
Maintaining
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Do not place your TV in direct sunlight or near a
heat source.
Cleaning the TV cabinet and screen
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
screen or cabinet with the cloth. Use a clean cloth to
dry the screen or cabinet.
Troubleshooting
Note
To reset input labels to the factory defaults, highlight
Reset Input Labels, then press ENTER or VOL to
confirm.
Custom
40
40
40
R5
+5
PICTURE
Picture
Adjust settings to affect picture quality
AUDIO
CHANNELS
SETTINGS
Mode
Brightness
Sharpness
Contras t
Color
Tint
MOVE
SELECT PREVIOUS EXIT
ENTER
OK
MENU EXIT
PICTURE
Settings
AUDIO
CHANNELS
SETTINGS
Parental Controls
Closed Caption
Computer Settings
Time
Menu Settings
Input Labels
MOVE
SELECT PREVIOUS EXIT
ENTER
OK
MENU EXIT
Set various TV options
Warning
Do not try to repair your TV yourself. Refer all service
to a qualified service technician.
Problem Solution
No picture, no sound
• Make sure that your TV is plugged
in to a power outlet.
• Make sure that the power outlet is
working.
Blank screen
• Make sure that you have selected
the correct video input source.
Press INPUT to select the source.
• If power has been interrupted, turn
your TV off then on again.
No sound
• Press MUTE to make sure the
sound is not muted.
• Increase the volume.
• Try another channel. The problem
may be with the broadcaster.
Poor sound
• Adjust the sound settings. For more
information, see “Adjusting the
sound” on page 17.
No picture on some channels
• Make sure that the channel has a
signal.
• Adjust the antenna.
No color on some channels
• Try another channel. The problem
may be with the broadcaster.
•Adjust the color. For more
information, see “Adjusting the TV
picture” on page 16.
• Make sure that all cables are
connected correctly and securely.
Spots appear on some pictures
• Make sure that the antenna is in
good condition.
• Adjust the antenna.
Abnormal functioning
• Unplug the power cord, wait 10
seconds, then plug the power cord
back in and turn on your TV.
• If the problem persists, contact an
authorized repair technician.