Insignia NS-L46Q120-10A Flat Panel Television User Manual


 
20
NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV
www.insigniaproducts.com
Press HDMI once to select HDMI 1.
Press HDMI twice to select HDMI 2.
Press HDMI three times to select HDMI 3.
Press HDMI four times to select HDMI 4.
On-screen menu overview
Picture menu
Audio menu
Channel menu
Settings menu
Navigating the menus
To navigate the menus:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight a primary menu, then
press ENTER. You can select:
PICTURE
AUDIO
CHANNEL
SETTINGS
3 Press or to highlight a setting, then press
ENTER to access the submenu.
4 Press or to highlight a setting selection,
then press ENTER.
Or,
Press or to adjust a setting level, then press
ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting a channel
To select a channel:
Press CH or CH to go to the next higher or
lower channel in the channel list.
Press the number buttons to directly select a
channel. For example, if you want to view
channel 83, press 8, then press 3.
Press RECALL to go to the last viewed
channel.
Press the number buttons for a main DTV
channel, press, then press the number for a
DTV sub-channel to go to a digital
sub-channel. For example, to go to
sub-channel 1 of main channel 83, press 8, 3,
, then 1.
Note
To automatically switch the input source whenever a
new device is connected, turn on the Auto Input
Sensor feature. See “Turning the Auto Input Sensor
on or off” on page 37.
Notes
Button presses must be within three seconds of
each other.
You can press the number buttons to go to a
channel that was skipped in the channel
scanning.