Insignia NS-L46Q120-10A Flat Panel Television User Manual


 
18
NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV
www.insigniaproducts.com
Connecting a computer
To connect a computer:
1 Make sure the TV’s power cord is unplugged
and the computer is turned off.
2 Connect a VGA cable to the VGA jack on the
side of your TV and to the VGA jack on the
computer.
3 Connect an audio cable to the VGA AUDIO jack
on the side of your TV and to the AUDIO OUT
jack on the computer.
4 Turn on your TV, then turn on the computer.
5 Press INPUT to open the source list, press or
to highlight VGA, then press ENTER.
Connecting a digital audio amplifier
To connect a digital audio amplifier:
1 Make sure the TV’s power cord is unplugged
and the amplifier is turned off.
2 Connect a digital optical (Toslink) audio cable to
the AUDIO OUT SPDIF jack on the back of your
TV and to the SPDIF AUDIO IN jack on the
digital audio amplifier.
3 Turn on your TV, then turn on the digital audio
amplifier and set it to the correct output mode.
See the documentation that came with the
amplifier for more information.
Connecting an analog audio amplifier
To connect an analog audio amplifier:
1 Make sure the TV’s power cord is unplugged
and the amplifier is turned off.
2 Connect an audio cable to the AUDIO OUT L
and R on the back of your TV and to the AUDIO
IN L and R jacks on the analog audio amplifier.
3 Turn on your TV, then turn on the analog audio
amplifier and set it to the correct output mode.
See the documentation that came with the
amplifier for more information.
Side of TV
Digital audio amplifier
Back of TV
Note
The connectors on audio cables are often
color-coded.
White is left audio, and red is right audio.
Analog audio amplifier
Back of TV