Insignia NS-L46Q120-10A Flat Panel Television User Manual


 
24
NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV
www.insigniaproducts.com
DCM—Delivers clear and fast action images
by reducing motion blur in fast-paced
programming like sports. Image refresh rate
increases to 120 frames per second (120 Hz).
You can select Off, Low, Normal, or High.
Advanced Contrast—Sets advanced contrast
settings. You can select:
Adaptive Contrast—Automatically
adjusts the picture detail and brightness.
Dynamic Contrast Ratio—Enhances
contrast between the light and dark areas
of the picture. This feature enables
automatic contrast adjustment based on
the picture brightness.
6 Press or to highlight a setting option, then
press ENTER.
Or,
Press or to adjust a setting level, then press
ENTER.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Fitting the picture to the screen
In TV mode only, your TV can automatically adjust
the picture so that everything fits in the visible
space of the screen.
To fit the picture to the screen:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNEL, then
press ENTER. The Channel menu opens.
3 Press or to highlight Auto Zoom, then
press ENTER.
4 Press or to highlight On or Off, then press
ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Freezing the picture
There may be instances when you want to jot down
information displayed on the TV but you have no
pen handy. In such cases, you can “lock” the current
display in place.
To freeze the picture:
Press FREEZE once to “lock” the current display in
place.
Press the button again to resume the regular
programming.
Adjusting the sound
Selecting the audio mode
When the Equalizer setting in the Audio menu is
set to on, you can press AUDIO to select the audio
mode. If the Equalizer setting is set to Off, you can
select the audio mode from the on-screen menu.
To select the audio mode when the Equalizer
setting is set to On.:
Press AUDIO one or more times to select the
audio mode. Your TV displays the currently
selected audio mode.
To select the audio mode when the Equalizer
setting is set to Off:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight AUDIO, then press
ENTER. The Audio menu opens.
3 Press or to highlight Equalizer, then press
ENTER.
4 Press or to highlight On, then press ENTER.
5 Press or to highlight Equalizer Mode, then
press ENTER.
6 Press or to highlight an equalizer mode,
then press ENTER. You can select Standard,
Music, Theater, News, or Custom.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.