Filter
Top Products
4
www.insigniaproducts.com
Installing the stand or a
wall-mount bracket
Installing the stand
If you plan to use your TV/DVD combo in an upright
position on a flat surface, you need to install the
stand.
To install the stand:
1 Place a towel or cushion on a flat surface, then
lay your TV/DVD combo face-down on the towel
or cushion.
2 Find the insert place on the stand.
3 Slide the stand into the insert place.
4 Secure the stand with the four provided screws.
Attaching a wall-mount bracket
To attach a wall-mount bracket:
1 If the stand is installed, remove the four screws
that secure the stand to the TV, then remove the
stand.
2 Secure the wall-mount bracket (not provided) to
the back of your TV/DVD combo using the
screws that secured the stand to your TV. These
are M4*16 (4 mm diameter and 16 mm screw
thread length) screws.
Insert place
Stand
Stand
Warning
These instructions are for use by qualified service
personnel only. To reduce the risk of damage or
injury, do not wall-mount your TV/DVD combo
unless you are qualified to do so.
3.937"
(100 mm)
3.937"
(100 mm)
Location for
wall-mount
bracket