Filter
Top Products
Initial Setup
51
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture
signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p
picture signal is being displayed on the screen. There are two types of 480p picture signals:
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted
by selecting either SIZE1 or SIZE2.
Press the M
ENU button
π†
To DIGITAL-IN
è
To enter
è
To select SIZE1 or SIZE2
Press the MENU button when finished
Note:
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the
Digital-In terminal and the picture is being displayed on the screen.
Digital-In
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
TV SPEAKER
AUDIO OUT
CENTER CH INPUT
ATSC SOUND
DIGITAL-IN
ON
FIX
OFF
PCM
SIZE1
ATSC Sound
Manufactured under license from Dolby Laboratories. "Dolby", and the
double-D symbol are trademarks of Dolby Laboratories. Confidential
unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
You can select the optical digital sound output, either PCM or Dolby Digital when your TV is
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can
enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the M
ENU button
π†
To ATSC SOUND
è
To select PCM or DOLBY DIGITAL
Press the MENU button when finished
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
TV SPEAKER
AUDIO OUT
CENTER CH INPUT
ATSC SOUND
DIGITAL-IN
ON
FIX
OFF
PCM
SIZE1
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 19.
AV-56\65WP941 English 51 10/17/03, 1:03:05 PM