JVC AV-28E50SK, AV-32E50SK CRT Television User Manual


 
- 18 -
Sound Menu
 Press MENU button, now you are in MENU. In the
MENU, select SOUND using   or   button, then
enter the sound menu by pressing 
 or   button.
Setting Volume
As you enter the sound menu, Volume will be the first
selected option.
 Press 
 button to increase volume.
 Press 
 button to decrease volume.
Or you can directly change the volume settings using
+ (to increase) or -  (to decrease) button.
Setting Balance
It allows adjusting the distribution between the left and
right speakers.
 Using 
 or   button select Balance.
 Press 
 button to change balance to the right.
 Press 
 button to change balance to the left.
When balance control is in mid position, the cursor is
displayed with two reciprocal arrows.
Selecting Sound Mode
 Using   or   button select Sound Mode.
 Press 
 or   button to change Mode.
You can select MONO, STEREO, DUAL-I or DUAL-II
mode, only if the selected channel supports that mode.
In case of bilingual broadcast (Dual Sound), you can
select original or dubbed language using mode option.
Setting Bass
You can adjust the low tone of the sound.
 Using 
 or   button select Bass.
 Press 
 button to increase bass level.
 Press 
 button to decrease bass level.
Setting Treble
You can adjust the high tone of the sound.
 Using 
 or   button select Treble.
 Press 
 button to increase treble level.
 Press 
 button to decrease treble level.
To Store the Settings
In the Sound Menu, all settings are stored automati-
cally.
Feature Menu
 Press MENU button, now you are in MENU. In the
MENU, select Feature using   or   button. Then
enter the Feature menu by pressing 
 or   but-
ton.
Sleep Timer
As you enter the Feature menu, Sleep Timer will be
the first selected option. Use 
 or   button to
change the Sleep Timer values between OFF, 10, 20,
30, ......, 110 and 120.
If sleep timer is activated, at the end of the selected
time, the TV goes automatically to stand-by mode.
You can also set the Sleep Timer by pressing the Yel-
low button directly.
Child Lock
You can use this feature to prevent children turning the
TV on or changing programs or adjustments etc. with-
out remote control.
The Child Lock feature can be set by 
 or   but-
ton to either ON or OFF. When OFF is selected, there
will be no difference in the operation of your TV. When
ON is selected, the TV can only be controlled by the
remote control handset. In this case, the front panel
buttons (except the Power On/Off button) will not work.
If Child Lock is ON, when one of the front panel buttons
(except power button) is pressed, CHILD LOCK OSD
is seen on the screen.
JVC-AK49-IDTV-ENG-28&3229W-STEREO-BSI-C1815S-(AV-28&32E50SK)-50066123.p65 24.05.2005, 15:1618