Filter
Top Products
- 27 -
Tips
Can not turn the TV on?
Check that TV/VCR/DVD switch is set to TV position.
TV may go to stand-by mode when you turn the TV on
soon after you turn the TV off. If you can turn the TV on
again, it is not a problem.
Can not turn the TV off?
Check that TV/VCR/DVD switch is set to TV position.
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do
not use abrasive solvents as they may damage the TV
screen coating layer.
Colours of image on screen are abnormal
Have you selected the correct TV system? Is your TV
set or house aerial located too close to the loudspeak-
ers, non-earthed audio equipment or neon lights, etc. ?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the pic-
ture quality by changing the direction of the aerial.
Is the picture or Teletext unrecognisable? Check if you
have entered the correct frequency.
The picture quality may degrade when two peripherals
are connected to the TV at the same time. In such a
case, disconnect one of the peripherals.
No Image on Display Screen
Is the aerial connected properly? Are the plugs con-
nected tightly to the aerial socket? Is the aerial cable
damaged? Are suitable plugs used to connect the
aerial? If you are in doubt, consult your dealer.
No Image means that your TV is not receiving any
transmission. Have you pressed the correct buttons
on the remote control? Try once more.
Sound
You can not hear any sound. Did you perhaps interrupt
the sound, pressing
button? Are external speakers
connected to the TV?
Sound is coming from only one of the speakers. Is the
balance set to one direction extreme? See Sound
menu.
Remote Control
If your TV no longer responds to the remote control,
perhaps the batteries are exhausted. Replace the bat-
teries.
Have you selected the wrong menu? Press MENU
button to return to normal screen or press BACK but-
ton to return to the previous menu.
No solution
If the TV suddenly stops responding, disconnect the
power cord of the TV from the AC outlet. Connect it to
the AC outlet again to turn on the TV. If the TV returns
to a normal state, it is not a failure. If this does not
work, switch off, remove the mains plug and call the
service personnel; never attempt to repair it yourself.
Bad picture (in digital mode)
Although this TV can receive both Digital terrestrial broad-
casting (DVB-T) and Analogue terrestrial broadcasting,
you may not be able to receive DVB-T depending on the
area in which you live.
If the picture freezes a lot, or block effect is seen fre-
quently on screen, probably there is a problem with your
reception.
Please contact customer services of your service pro-
vider if you are a subscriber.
For users in the UK:
If you have any problems setting up
your new TV, please call the
Helpline on 0870330 5000
For users in the Republic of Ire-
land:
If you have any problems setting up
your new TV, please call the
Helpline on 1890 - 582500
JVC-AK49-IDTV-ENG-28&3229W-STEREO-BSI-C1815S-(AV-28&32E50SK)-50066123.p65 24.05.2005, 15:1627