JVC AV-28E50SK, AV-32E50SK CRT Television User Manual


 
- 23 -
To Reveal concealed Information
 Pressing   button once will reveal answers on a
quiz or games page.
 Pressing 
 button again will conceal the revealed
answers.
To Stop Automatic Page Change
The teletext page you have selected may contain more
information than what is on the screen; the rest of the
information will be displayed after a period of time.
 Press 
 button to stop the automatic page change.
 Press 
 button again to allow the next page to be
displayed.
To Select a Subcode Page
Subcode pages are subsections of long Teletext pages
that can only be displayed on the screen one section at
a time.
 Select the required Teletext page.
 Press   button.
 Select the required subcode page number by press-
ing four digit buttons (e.g. 0001).
 If the selected subcode page is not displayed in a
short time, press 
 button. TV programme will be
displayed on the screen.
 Teletext page number will be displayed on the upper
left corner of the screen when the selected page is
found.
 Press   button to display the selected Teletext
page.
To exit Teletext
 Press   button. The screen will switch to TV mode.
Fastext and Toptext
Your TV supports the 7 page Teletext system. When
the page number of any of the 7 pages in memory is
entered, the system will not search for the requested
page; instead it will display the page automatically.
 Press 
 button to move the Teletext screen for-
ward one page at a time.
 Press 
 button to move the Teletext screen back-
ward one page at a time.
For Fastext and Toptext
The subject-heading for the information may have a par-
ticular colour.
 Press an appropriate RED, GREEN, YELLOW or BLUE
button in order to reach the relevant page quickly.
For TOPTEXT
If Toptext transmission is present, colour coded but-
tons will appear in status row.
If Toptext transmission is not present, status row will
not appear.
In Toptext mode the 
 or   commands will
request the next or previous page respectively. If Top-
text transmission is not available, in case of operation
of these commands, wraparound occurs. For example
page 100 appears to be one greater than page 199.
Toptext has a special page called HITLIST which can
be displayed by pressing the   button. Use colour
buttons on HITLIST page to select a line which will link
you to another teletext page.
To use the Favourite Page List mode
You can store the numbers of your favourite teletext
pages and call them up quickly using the colour but-
tons.
 Press F.T/L button to go into the list mode. The page
numbers you have stored are displayed at the bottom
of the screen.
 Press the number buttons to enter the page number
to be stored.
 Press the (Store) button. Then the four page num-
bers will be highlighted.
 Press a colour button to choose a position. Then the
four page numbers will blink white to show that they
are stored in memory.
To call up a stored page:
 Press F.T/L button to enter the List mode.
 Press a colour button having a stored page.
To exit the List mode:
 Press the F.T/L button again.
Peripheral Equipment
Connections
There is a wide range of audio and video equipment that
can be connected to your TV.
Connection diagrams at the end of this section show you
where the different equipment should be connected at
the back side of the TV.
Via the Euroconnector
Your TV set has 2 Euroconnector sockets. If you want
to connect peripherals (e.g. video, decoder, etc.) which
have Euroconnectors, to your TV, use EXT.1 or EXT.2
input.
If an external device is connected via Euroconnector
sockets, TV is switched to AV mode automatically. In
this case if both sockets are connected, SCART1 has
the precedence.
JVC-AK49-IDTV-ENG-28&3229W-VDOLBY-BSI-C1815S-(AV-28&32E88SK)-50062788.p65 24.05.2005, 15:2123