Filter
Top Products
- 17 -
Picture Menu
Press MENU button, now you are in main menu. In
the Main menu, select Picture using or but-
ton, then enter the Picture menu by pressing
/
or OK button.
Setting Brightness
As you enter the picture menu, Brightness will be the
first selected option.
Press button to brighten the picture.
Press
button to darken the picture.
Setting Contrast
Contrast is the difference and distribution of light and
dark tones in an image.
Using
or button select Contrast.
Press
button to increase contrast level.
Press
button to decrease contrast level.
Setting Colour
Using or button select Colour.
Press button to increase colour saturation.
Press
button to decrease colour saturation.
Setting Sharpness
Using or button select Sharpness.
Press
button to sharpen the picture.
Press button to soften the picture.
Setting Tilt
This function is used for tilt correction of the picture.
Using
or button select Tilt.
Press
button to rotate the picture to the right.
Press
button to rotate the picture to the left.
Setting Hue (In AV mode only)
(During Playback NTSC system, this will appear in AV
mode only when NTSC video source is applied. Other-
wise, HUE option is invisible in Picture menu.):
Using or button select Hue.
Press button to increase the green tones.
Press
button to increase the red tones.
Center value is indicated with two reciprocal arrows.
Setting Picture Mode
This item is used to change the picture mode. By press-
ing
or button you may select one of these
options: STANDARD, SOFT and BRIGHT.
You can also set the Picture Mode by pressing the Blue
button directly.
Setting Colour Temp
This item is used for white colour tint adjustment. By
pressing or button you may select one of these
options: COOL, NORMAL, WARM.
Setting VNR (Video Noise Reduction)
This item is used to reduce the image noise and im-
prove the picture quality at weak signals.
Using
or button select VNR.
Press
or button to set VNR level to OFF,
MIN, AUTO or MAX.
AUTO adjusts the VNR level to OFF, MIN or MAX auto-
matically according to the intensity of the noise.
Setting VCR Mode (In AV mode only)
Using or button select VCR Mode.
When you watch a picture from your VCR and the
picture is unstable, you may improve it by changing
the VCR MODE setting from ON to OFF.
Reset
Press BLUE button to reset the picture modes to fac-
tory default settings.
To Store the Settings
In the Picture Menu, all settings are stored automati-
cally.
JVC-AK49-IDTV-ENG-28&3229W-VDOLBY-BSI-C1815S-(AV-28&32E88SK)-50062788.p65 24.05.2005, 15:2117