Filter
Top Products
To display the SOUND SETTING menu:
1 Press the
button to display MENU
(main menu).
2 Press the
button to choose SOUND
SETTING. Then press the
button.
■
■■
■
When you are viewing a bilingual broadcast programme, you
can choose the sound from Bilingual I (Sub I) or Bilingual II
(Sub II). When the stereo broadcasting is received poorly, you
can change from stereo to mono sound so that you can hear
the broadcast more clearly and easily.
1
Press
buttons to choose STEREO / I • II.
2
Press
buttons to choose a sound
mode.
: Stereo sound
: mono sound
: BIlingual I (sub I)
: BIlingual (sub II)
3
Press the
button to complete the set-
ting.
The menu disappears.
Note:
• The sound mode you can choose differs depending
on the TV programme.
• This function does not work in the EXT modes. And
this function does not appear in the SOUND SET-
TING menu.
■
■■
■
You can adjust the sound to your liking.
1
Press the
buttons to choose an item.
2
Press the
buttons to adjust it.
3
Press the
button to complete the set-
ting.
The menu disappears.
Note:
• When the DOLBY PRO LOGIC function or PRO
LOGIC 3D-PHONIC function is operating, the “BAL-
ANCE” item does not appears.
■
■■
■
You can turn off the sound from the TV speakers; but you
should only do this if an audio system is connected to the TV
as a substitute for the TV speakers. When you are using this
function, see “Setting the SPEAKER function” on page 34.
When a sound is not issued from the TV speaker:
If the SPEAKER function is set to OFF, the TV speaker does
not issue sound. Press the
buttons to choose the
SPEAKER. Then press buttons to choose ON.
Note:
• When the DOLBY PRO LOGIC function or PRO LOGIC
3D-PHONIC function is operating, the “SPEAKER” item
does not appears.
■
■■
■
You can use the BBE function to enjoy easy-to-listen sound
that is faithful to the original sound recorded.
1
Press
buttons to choose BBE.
2
Press
buttons to choose ON.
To cancel the BBE function:
Press
buttons to choose OFF.
3
Press the
button to complete the set-
ting.
The menu disappears.
•
Licensed by BBE Sound Inc. BBE is a registered trade-
mark of BBE Sound, Inc.
■
■■
■
You can use the POWER BASS function to enjoy richer and
fuller bass sound.
Preparation:
The POWER BASS function is only displayed in the SOUND
SETTING menu when the BBE function is turned on. Turn the
BBE function on before using the POWER BASS function.
1
Press
buttons to choose POWER
BASS.
2
Press
buttons to choose ON.
To cancel the POWER BASS function:
Press the buttons to choose OFF.
3
Press the
button to complete the set-
ting.
The menu disappears
Item
Weaker
BASS
Stronger
Weaker
TREBLE
Stronger
Left
BALANCE
Right
WFR1EK_E2.fm Page 20 Wednesday, February 16, 2000 3:42 PM