Filter
Top Products
'
■
■■
■
'
''
'
+
++
+
,
,,
,
-
--
-
'
''
'
Connect the devices to the TV, paying attention to the Rear
panel connections and the Front panel connections.
Before connecting anything:
• Read the manuals provided with the devices. Depending
on the devices, the connection method may differ from
the figure. In addition, the device settings may be
changed depending on the connection method to secure
proper operation.
• Turn off all the devices including the TV.
• The “SPECIFICATIONS” on the back cover contains the
details of the EXT terminals. If you are connecting a de-
vice not listed in the following connection diagram, see
the table to choose the best EXT terminal.
• Note that connecting cables are not supplied.
1VCR (composite signal)
2VCR (composite signal/S-VIDEO signal)
3T-V LINK compatible VCR (composite signal/S-VIDEO sig-
nal)
4Decoder
5DVD player (composite signal/S-VIDEO signal)
6DVD player (composite signal/RGB signal)
7TV game (composite signal/RGB signal)
8TV game (composite signal/S-VIDEO signal)
9Headphones
0Camcorder (composite signal/S-VIDEO signal)
-SCART cable
=Audio cable
~Video cable
!S-VIDEO cable
(
((
(
$
$$
$
)
))
)
*
**
*
$
$$
$
$
$$
$+
++
+
&
&&
&#
##
#
,
,,
,#
##
#
%
%%
%
)
))
)
+
++
+-
--
-
.
..
.
/
//
/!
!!
!
)
))
)
+
++
+-
--
-0
00
0
)
))
)#
##
#$
$$
$
+
++
+)
))
)
+
++
+
%
%%
%
1
11
1
!
!!
!
Connect the device to an EXT terminal other than the EXT-1
terminal.
You can choose a video input signal from the S-VIDEO signal
(Y/C signal) and regular video signal (composite signal). For
details of how to operate the device, see “(S-VIDEO in-
put)” on page 24.
%
%%
%
2
22
2
$
$$
$&
&&
&3
33
3,
,,
,+
++
+
4
44
4-
--
-
!
!!
!
Be sure to connect the T-V LINK compatible VCR to the EXT-
2 terminal. If not, the T-V LINK function will not work properly.
Note:
• When connecting a T-V LINK compatible VCR to the EXT-
2 terminal, be sure to connect the Decoder to the VCR. If
not, the T-V LINK function may not work properly. After
you have registered TV channels to the Programme num-
bers (PR), set the DECODER (EXT-2) function for the Pro-
gramme number (PR) to ON in order to unscramble a
scrambled TV channel. For details of operation, see “Us-
ing the DECODER (EXT-2) function” on page 33.
!
!!
!&
&&
&
$
$$
$
+
++
+5
55
5,
,,
,
&
&&
&
)
))
)
Connect the headphones with a stereo mini-jack (of 3.5mm in
diameter) to the headphone jack at the TV front panel.
Note:
• When you connect the headphones, the TV speakers is-
sue no sound.
5
55
5
&
&&
&/
//
/)
))
)&
&&
&#
##
#
5
55
5
)
))
)
+
++
+-
--
-
&
&&
&#
##
#
,
,,
,#
##
#
"
""
"6
66
6&
&&
&3
33
3
7
77
7
%
%%
%
6
66
63
33
3
+
++
+-
--
-
You can arbitrarily change over the output of the video/sound
signal from the EXT-2 terminal. It is useful when you want to
dub the video/sound from another device on the VCR con-
nected to the EXT-2 terminal. For details on how to do this op-
eration, see “DUBBING” on page 25.
&
&&
&#
##
#
,
,,
,#
##
#
"
""
"6
66
6&
&&
&3
33
3
7
77
7
%
%%
%
6
66
63
33
3
+
++
+-
--
-
The output of video/sound signal of a TV channel you are cur-
rently viewing is always output from the EXT-1 terminal.
Note:
• Changing over a Programme number (PR) also changes
over the TV output from the EXT-1 terminal.
• The video/sound signal from an EXT terminal cannot be
output.
• Teletext programmes cannot be output.
(Behind the door)
R
AUDIO OUT
SURROUND
REAR
L
(8 )
EXT-
1
EXT-
2
S
EXT-
3
S
WFR1EK_E3.fm Page 36 Wednesday, February 16, 2000 2:37 PM