Filter
Top Products
To display the INSTALL menu:
1 Press the
button to display MENU
(main menu).
2 Press the
button to choose the INSTALL
menu. Then press the
button.
■
■■
■
You can choose the language you want to use for the on-
screen display from the language list in a menu.
1
Press the
buttons to choose LAN-
GUAGE. Then press the
button.
A sub-menu of the LANGUAGE function appears.
2
Press the
buttons to choose a lan-
guage.
3
Press the
button to complete the set-
ting.
The menu disappears.
■
■■
■
You can automatically register the TV channels which can be
received well at your residence in the TV’s Programme num-
bers (PR) by performing the following.
1
Press the
buttons to choose AUTO
PROGRAM.
2
Press the
button to start the AUTO
PROGRAM function.
The AUTO PROGRAM menu appears and received TV
channels are automatically registered in the Programme
numbers (PR).
To cancel the AUTO PROGRAM function:
Press the
button.
3
After the TV channels have been regis-
tered in the Programme numbers (PR), the
EDIT menu appears.
You can proceed to edit the Programme numbers (PR)
using the EDIT/MANUAL function. For details, see “ED-
IT/MANUAL” on page 29.
When not using the EDIT/MANUAL function:
If you do not need to use the EDIT/MANUAL function, go
to the next step.
4
Press the
button to display the T-V LINK
menu.
5
Operate the T-V LINK menu according to
the type of VCR connected to the EXT-2
terminal.
When a T-V LINK compatible VCR is not con-
nected:
Press the
button to exit the T-V LINK menu.
The T-V LINK menu disappears, and all the settings are
completed.
When a T-V LINK compatible VCR is connected:
Follow the operating procedure “Downloading the data
to VCR” on page 33 to transmit the Programme number
(PR) data to the VCR.
Note:
• To receive SKY 1 a satelite tuner is needed. You
must have the satelite tuner set to SKY 1 before
starting the AUTO PROGRAM function.
• If a TV channel you want to view is not set to a Pro-
gramme number (PR), manually set it using the
MANUAL function. For details, see “EDIT/MANUAL”
on page 29.
• The TV channel is not registered in Programme
number PR 0 (AV). When you want to register a TV
channel to PR 0 (AV) manually set it using the MAN-
UAL function. For details, see “EDIT/MANUAL” on
page 29.
• In some areas TV reception is possible from more
than one transmitter, e.g. different ITV regions. In
this case each TV channel may be set twice. If this
happens the first set of channels will have the
stronger signal. If you want to delete the second set
of channels, you will have to do it manually, see
page 31.
WFR1EK_E3.fm Page 28 Wednesday, February 16, 2000 2:37 PM