JVC AVO48WP30 Projection Television User Manual


 
iMPORTANT SAFEGUARDS
CAUTION:
Please read and retain for your safety.
Electricai energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personai safety. But improper use can reauJt in potential
electrical shock or fire hazards! in order not to defeat the safeguards incorporated in this TV
set, observe the following basic ruies for its instailation, use and servicing.
And also follow all warnings and instructions marked on your TV set.
1) Your TV set is equipped with a polarized AC line plug (one blade of the plug is wider than
the other).
(POLARIZED:TYPE)
This safety feature allows the plug to fit into the power outtet only one way. Should you be
unable to insert the plug fuity into the outlet, try reversing the plug.
Should it still fail to fit, contact your electrician=
2) Operate the TV set only from a power source as indicated on the TV set or refer to the
operating instructions for this information, if you are not sure of the type of power supply to
your home, consult your TV set dealer or local power company. For battery operation, refer
to the operating instructions.
3) Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement=
4) Do not allow anything to rest on or toil over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
5) Do not use this TV set near water = for example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near swimming pool, etc.
6) if an outside antenna is connected to the TV set, be sure the antenna system is grounded
so as to provide some protection against voltage surges and buiit=up static charges. Section
810 of the National Electrical Code provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead=in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge unit, connection
requirements for the grounding electrode.
-- n
IMPORTANT RECYCUNG iNFORMATiON
This product utilizes both a Cathode Ray Tube (C RT} and other
components that contain lead° Disposal of these materials may be
regulated in your community due to environmental considerations.
For disposal or recycling information, p_ease contact your local
authorities, or the Electronic industries Alliance: http:!iwww.eiae.org