Filter
Top Products
EN 29
Watching one program while
recording another
1 Engage TV mode
During recording...
● Change the TV’s input mode from AV to TV.
2 Select channel for viewing
Select the channel you want to watch, on the TV.
Showing on-screen display
When “SUPERIMPOSE” is set to “ON” (੬ pg. 56), you
can see the current VCR status on the TV screen.
● For more detailed information about the on-screen
display, see page 79.
1 Display VCR status on TV screen
During recording or
recording pause, press
OSD on the Remote.
All indications
corresponding to the
current VCR status are
displayed for 5 seconds.
The time counter remains
on the screen indicating the elapsed time.
● The indications are not recorded.
2 Exit on-screen display
Press OSD again.
NOTES:
●
If the VCR is in recording pause mode, “REC PAUSE” is
always displayed.
●
The VCR status can be also displayed during playback.
D
C E
.
Recording on VHS tapes with
S-VHS quality — Super VHS ET
This function allows you to record on VHS tapes with
S-VHS picture quality. Tapes recorded using this function
can be played back only on a VCR equipped with the
S-VHS ET function.
● You can activate this function only before you start
recording on a VHS tape.
● Before recording, make sure “V, CALIBRATION” is set
to “ON” (੬ pg. 49).
1 Select S-VHS ET mode
Press S-VHS ET on the front panel. The S-VHS ET
lamp lights up.
● To disengage the S-VHS ET mode, press S-VHS ET
again. The lamp goes off.
2 Start recording
On the front panel:
Press REC ( ¶ ).
On the Remote:
While holding REC ( ¶ ), press PLAY ( 3 ).
NOTES:
●
You cannot activate the S-VHS ET function...
– while recording is in progress.
–while timer-recording or Instant Timer Recording
(
੬
pg. 28) is in progress.
–while Video Calibration (
੬
pg. 53) is in progress.
●
S-VHS ET does not work with S-VHS tapes.
●
To keep the highest quality recording and playback pictures
over a long period of time, S-VHS recording on S-VHS tapes
is recommended.
●
Use of high grade tapes are recommended for S-VHS ET
recordings.
On some tapes, picture quality will not improve even if the S-
VHS ET function is used. Check the recording quality before
you start important recordings.
●
You can play back S-VHS ET recordings on most of S-VHS
VCRs and of VHS VCRs equipped with SQPB (S-VHS QUASI
PLAYBACK) function. (Notice some VCRs are not compatible
with this function.)
●
While playing back a tape recorded with this function, noise
may appear. (If playback picture becomes blurred or
interrupted, use a cleaning cassette.)
●
During special effect playback (
੬
pg. 31), noise may appear.
If special effect playback is performed frequently on a tape
recorded with this function, the tape may be damaged and
picture may be deteriorated
SAP STEREO
REC PAUSE
HI-FI
THU 12:00 AM ]
STD
– 1:23:45
33
INDEX-9
BE
VDA300U-EN21-33 03.7.18, 12:11 PM29