JVC SR-VDA300U DVR User Manual


 
72 EN
Front display panel
1 Recording speed indicator : pg. 26
Timer programming indicator (“Pro” appears
when PROG. or PROG. CHECK button is
pressed. “Err” appears when the guide channel
error occurs.) : pg. 40
2 Audio Monitor Indicators : pg. 23
3 Symbolic Mode Indicators : pg. 23
4 Timer mode indicator : pg. 35, 39
5 D-VHS indicator : pg. 45
6 Program Timer indicator : pg. 40
7 S-VHS ET indicator : pg. 29
S-VHS
ET
+
8
-
15
0dB
NORM
1
9
08
23 4 5 6 7
!
STILL:
SLOW:
RECORD:
RECORD PAUSE:
PLAY:
FF/REW VARIABLE
SHUTTLE SEARCH:
8 Guide Track Indicators
Remaining time (inside)/Tape position (out
side) Indicators
Audio level indicators (inside for right sound/
outside for left sound)
(You can select which of indicators above to display by
setting “FRONT DISPLAY” (
pg. 52).)
9 Cassette mark
0 Tape remaining time indicator : pg. 22, 28
! Channel and auxiliary input (“L-1”, “L-2”, “F-1”
and “I-1 etc.”)
Counter reading : pg. 22, 28
(If the counter exceeds –20 hours ("–20:00:00"),
the display does not show the "–2" of "–
20:00:00". In this case, confirm the counter on
the TV screen.)
Clock time : pg. 22, 28
Child lock indicator : See below
INDEX (cont.)
Child Lock
You can disable the VCR operations.
You can only use the Remote for this operation.
While the VCR is turned on, press and hold POWER on
the Remote for more than 10 seconds.
The VCR turns off, and the child lock indicator (CL)
appears on the front display panel.
The child lock function is now activated and you
cannot turn on the VCR by pressing POWER on the
front panel.
Child lock indicator
To release the child lock, press and hold POWER on the
Remote until the VCR turns on.
During timer recording, pressing TIMER also releases
the child lock.
NOTES:
When the child lock function is in use, keep the Remote out
of the children’s reach.
Timer recording programs will be performed even if the child
lock function is activated.
VDA300U-EN64-79 03.7.18, 12:14 PM72