JVC SR-VDA300U DVR User Manual


 
EN 53
R
Y
L
P
B/CB
VIDEO
P
R
/C
R
S VIDEO S VIDEO
AUDIO
R
IN
(L-1)
IN(L-2)
L(MONO) VIDEO
REMOTE PAUSE/
AV COMPULINK
CABLE BOX
ANTENNA
AUDIO
OUT
OUT
OUT
TV
IN
VHF/UHF
IN
DVB-ASI
IN
SYNC
POL
AC120V 1A G
+
* The default setting is bold in the table below.
To AV COMPU
LINK II
(VCR ONLY)
AV COMPU LINK
Television
This VCR
To AUDIO
OUT
Mini-plug cable (not supplied)
Audio cable (supplied)
To REMOTE
PAUSE/
AV COMPULINK
To AUDIO IN
To S-VIDEO
IN
S-video cable (supplied)
To S VIDEO
OUT
AV COMPU-LINK
ON
OFF
The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used as either the
REMOTE PAUSE terminal or the AV COMPULINK terminal.
When this function is set to “ON”, you can use this terminal as the AV COMPULINK
terminal.
By connecting other JVC’s AV COMPULINK components (see the diagram below),
including amplifiers (or receivers) and televisions, one touch control of the audio and
video components linked via their AV COMPULINK connectors becomes possible.
For example: simply load a cassette in the VCR and press PLAY ( 3 ) so that the AV COMPULINK
components automatically turn on, the TV’s AV mode is selected and the VCR starts playback. (You
do not have to press PLAY ( 3 ) if the cassette’s record safety tab is removed.)
When this function is set to “OFF”, you can use this terminal as the REMOTE PAUSE
terminal. ( pg. 56)
NOTE:
Connection varies depending on the type of JVC TV you have. Refer to the TV’s instruction manual
when making this connection.
S-VHS MODE
ON
OFF
You can determine which recording mode — either S-VHS mode or VHS mode — is
used for recording on D-VHS and S-VHS tapes.
When this function is set to “ON”, you can record on D-VHS and S-VHS tapes with
S-VHS picture quality.
When this function is set to “OFF”, you can record on D-VHS and
S-VHS tapes with VHS picture quality.
NOTES:
To record in S-VHS/VHS mode on D-VHS tape, press PRO HD to turn off the D-VHS indicator.
S-VHS mode allows you to make high quality video recordings with horizontal resolution of 400
lines, comparing with the 230 lines of resolution of conventional VHS recordings. To achieve the
highest quality picture we recommend to record in S-VHS mode. (But remember that a
conventional VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS mode.)
S-VHS MODE setting does not affect recording on VHS tapes. Recording on VHS tapes is always
performed in VHS mode except when using S-VHS ET mode (
pg. 29).
VDA300U-EN48-55 03.7.18, 12:13 PM53