JVC DR-DX5SEK DVR User Manual


 
Filename [DX5SEK_06DVD Operation.fm]
Masterpage:Left+
26 EN
BASIC OPERATIONS ON DVD DECK
Page 26Thursday, 10 November 2005 16:34
Skip Search
During playback, press v.
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Skip search cannot be performed when a VCD/SVCD disc is
being played back with the PBC function.
One Touch Replay
You can move back the playback position slightly.
Press w.
Each press skips back for approximately 7 seconds and resumes
playback.
Pressing while paused skips back for approximately 7 seconds
and resumes pause.
Jump Search
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (A pg. 73)
during playback (or Live Memory Playback).
Press JUMP – or JUMP +.
To advance forward or back, press JUMP – or JUMP +
repeatedly within 5 seconds of each press to continue jump.
Depending on the time from where you want to start jump search,
the first press of JUMP – or JUMP + will not necessarily lead to a
jump of the selected time interval. The first press will lead to a
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45
min/ 00 min). The subsequent jumps will then be in accordance
to the selected time interval.
When you cannot advance any further (beginning or end of
programme reached), the message AUNABLE TO GO BACK
ANY MOREB appears on the screen and the on-air screen
resumes. In such a case, press S, O or o.
Example:
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the programme. Pressing
JUMP –
or
JUMP +
will
result in a jump to the scene at the 30 minutes point or 45 minutes
point respectively as illustrated below. At the subsequent press, the
scene will jump to the 15 minutes point or 1 hour point respectively,
according to the selected time interval, which in this case is
A
15 MIN
B
.
NOTE:
Jump search cannot be performed with finalised DVD-R/DVD-RW
(video mode) discs.
Resume Function
It is possible to memorise the position where you stop playback
and resume playback from that position.
Be sure to set ARESUMEB to AONB or ADISC RESUMEB.
(A pg. 72)
Resume function always works for DVD-R/DVD-RW discs that
have not been finalised and DVD-RAM regardless of the setting
of ARESUMEB.
1 Press o during playback to memorise a resume point.
The unit enters Resume Stop mode and memorises the
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display panel
blinks while memorising.)
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected if
ARESUMEB is set to ADISC RESUMEB. (A pg. 72)
Performing the following steps would erase the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When ARESUMEB is set to AONB:
Press A to turn off the unit.
Press
M to take out the disc.
Press
o in stop mode.
Press
TOP MENU to display the top menu, then start playback by
selecting an item, etc.
Press
MENU to display the disc menu, then start playback by
selecting an item, etc.
When ARESUMEB is set to ADISC RESUMEB:
•Set ARESUMEB to AOFFB. (A pg. 72)
Press
o in stop mode.
Press
TOP MENU to display the top menu, then start playback by
selecting an item, etc.
Press
MENU to display the disc menu, then start playback by
selecting an item, etc.
2 Press I in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under AONB setting will be applied
even if ARESUMEB is set to ADISC RESUMEB. (A pg. 72)
If you stop the playback of a disc for which a resume point has
already been memorised, the memory will be updated with the
new resume point.
After the unit has memorised the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorised point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
When the unit memorises a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
This function may not work for some Video CD/SVCDs.
When ARESUMEB is changed to AONB or AOFFB (A pg. 72),
resume points of the discs memorised with ARESUMEB set to
ADISC RESUMEB will be cleared.
Resume points are memorised for each side of a double-sided
disc.
When you switch to HDD while playing back JPEG/MP3 files,
playback stops. The Resume Function doesn’t work when you
switch to DVD thereafter to playback the disc.
Time counter
Beginning of programme
Current scene
End of programme
0 min
30 min
1 h
40 min
1 h 15 min
15 min
45 min
DX5SEK_00.book Page 26 Thursday, November 10, 2005 4:35 PM