Filter
Top Products
Masterpage:Right+
EN 73
Filename [DX5SEK_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 73Thursday, 10 November 2005 16:34
8 JUMP TIME ^ 15 MIN / 30 MIN / 1 HR
You can locate a scene ahead of or behind the currently viewed
one by jumping a selected time interval during playback (or Live
Memory Playback). For details, refer to AJump SearchB (A pg. 26,
40).
DISPLAY SET
8 SUPERIMPOSE ^ AUTO / OFF
When this function is set to AAUTOB, various operational indicators
appear on the TV screen.
AUTO:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
OFF:
To turn off superimposed indications.
NOTES:
● When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 63)
● When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8 BLUE BACK ^ OFF / ON
When this function is set to AONB, the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals,
set this function to AOFFB.
8 DIMMER ^ BRIGHT / DIMMED
You can change the brightness of the front display panel.
BRIGHT:
Normally select this.
DIMMED:
To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8 POWER SAVE ^ OFF / ON
When this function is set to AONB, you can reduce the power
consumption while the unit is turned off.
NOTES:
● During Power Save mode ^
^ the front display panel will be turned off.
^ the Just Clock function (A pg. 77) does not work.
● Power Save does not work when ^
^ the unit is in the Timer mode.
^ the Automatic Satellite Programme Recording mode is
engaged. (A pg. 50)
^ AL-2 SELECTB is set to ADECODERB, ASAT VIDEOB or ASAT
S-VIDEOB. (A pg. 64)
● It takes some time for the unit to complete initialisation after you
turn on the unit power, with AWAKE UPB blinking on the front
display panel.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 10
different languages. You can change the language setting
manually as required.
DX5SEK_00.book Page 73 Thursday, November 10, 2005 4:35 PM