Filter
Top Products
Filename [DX5SEK_13Subsidiary.fm]
Masterpage:Left+
74 EN
SUBSIDIARY SETTINGS
Page 74Thursday, 10 November 2005 16:34
Guide Programme Number Set
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select AINITIAL SET UPB, then press
G.
3 Press selection keys to select
ATUNER SETB, then press G.
4 Press selection keys to select
AGUIDE PROG SETB, then
press ENTER.
5 Press selection keys to select
AGUIDE PROGB, then press
ENTER.
6 Press selection keys to select
the Guide Programme number
for the desired station as
shown in the TV listings. Then
press ENTER.
7 Press selection keys to select
ATV PROGB, then press ENTER. Press selection keys to select
the number of the unit’s channel position on which the Guide
Programme number’s broadcast is received by the unit or the
satellite receiver. Then press ENTER.
● Repeat steps 5 – 7 as necessary.
8 Press SET UP to complete the setting.
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR +/– buttons without going through any
vacant channels.
Auto Channel Set
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select AINITIAL SET UPB, then press
G.
3 Press selection keys to select ATUNER SETB, then press G.
4 Press selection keys to select
AAUTO CH SETB, then press
ENTER.
● When you have connected the
unit to a TV offering T-V Link
via a fully-wired 21-pin SCART
cable (A pg. 18), the unit
automatically performs the
Preset Download and the T-V
LINK screen will appear.
(A pg. 20)
● The Auto Set screen appears,
and remains on screen while
the unit searches for
receivable stations.
VIDEO Plus+ System Setup
IMPORTANT:
Normally, Auto Set Up (A pg. 19), Preset Download (A pg. 20)
or Auto Channel Set (A pg. 74) sets the Guide Programme
numbers automatically. You need to set the Guide Programme
numbers manually only in the following cases.
● When timer programming with the VIDEO Plus+ system, the
channel position, where the station you wish to record is
received on your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download
or Auto Channel Set has taken place,
^ Set the Guide Programme number for that station manually.
● When you wish to timer record a satellite programme with the
VIDEO Plus+ system,
^ Set the Guide Programme numbers for all satellite
broadcasts received on your satellite receiver.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
Guide Programme Number
AGuide Programme (GUIDE PROG) numberB refers to the
assigned TV station numbers, according to broadcast area, for
the VIDEO Plus+ timer recording. The Guide Programme
Numbers can be found in most TV listings.
13
12
11
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
AUTO CH SET MANUAL CH SET
HDD/DVD/DV SET FUNCTION SET UP INITIAL SET UP
TUNER SET CLOCK SET
GUIDE PROG SET
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
13
12
11
YLE21
1
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > GUIDE PROG SET
RETURN
TV PROG
GUIDE PROG
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
Tuner Set
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
IMPORTANT:
Perform the following steps only if ^
^ Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (A pg. 19, 20)
^ you have moved to a different area or if a new station starts
broadcasting in your area.
FGDE
ENTER
SET UP
CABLE/SAT
DVDTV
Selection Keys
13
12
11
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
HDD/DVD/DV SET
FUNCTION SET UP INITIAL SET UP
TUNER SET
CLOCK SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
DX5SEK_00.book Page 74 Thursday, November 10, 2005 4:35 PM