Filter
Top Products
Filename [MV5S_07Basic PlayRec.fm]
Masterpage:Left+
28 EN
BASIC RECORDING
Page 28Wednesday, 31 August 2005 16:55
1
Load a cassette with the record safety
tab intact.
● The unit’s power comes on automatically and the counter
is reset to 0:00:00.
2
Press VHS/DVD on the unit repeatedly
or VHS on the remote control so that
the VHS lamp lights up on the unit.
3
Press PR +/– or the number buttons to
select the channel you wish to record.
● If you record the programmes received by the satellite
receiver ...
1) Select “L-2” by pressing PR +/–.
2) Set the satellite receiver to the appropriate channel.
4
Press REC MODE repeatedly to set the
recording mode.
5
Press 7 on the unit to start recording.
Or while holding 7, press 4 on the
remote control.
● If “SUPERIMPOSE” is set to “AUTO” (੬ pg. 79), “MARK”
blinks on the screen while an index code is being marked.
● B.E.S.T. takes place at the beginning of both the first SP
and the first LP recording after inserting the cassette.
(
੬ pg. 64)
● If “DIRECT REC” is set to “ON”, the programme that
appears on the TV screen will be recorded. (
੬ pg. 79)
6
Press 9 to pause recording.
● You can select channel during the Record Pause mode.
● To resume recording, press 4.
7
Press 8 to stop recording.
Recording Mode
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (ITR) (
੬ pg. 63) or timer recording (੬ pg. 29,
31), the recording will resume automatically when power is
restored to the unit unless the unit’s memory backup has
expired.
Basic Recording (VHS)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
PR
DV IN
STANDBY/ON
S-VIDEO VIDEO AUDIO
VHS lamp
Recording
mode
Maximum
recording
time
(approx.)
Use
SP 3 hours Select when the picture
quality is important.
LP 6 hours Select when the time is
important. You can record 2
times longer than SP mode.
MV5S_00.book Page 28 Wednesday, August 31, 2005 4:55 PM