Filter
Top Products
Masterpage:Right+
EN 85
Filename [MV5S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 85Wednesday, 31 August 2005 16:55
Manual Channel Set
Store channels that were not stored during Auto Set Up
(੬ pg. 17), Preset Download (੬ pg. 18) or Auto Channel Set
(੬ pg. 84).
1 Press SET UP to access the Main Menu screen.
2 Press we to select “INITIAL SET UP”, then press t.
3 Press we to select “MANUAL CH SET”, then press t. The
Confirmation screen appears.
4 Press rt w e to select a
blank position in which you want
to store a channel, then press
ENTER twice. The Manual
Channel Set screen appears.
5 Press rt to select “BAND”,
then press ENTER.
6 Press rt to change the band
between CH (regular) and CC
(cable), then press ENTER.
7 Press rt to select “CH”, then
press ENTER.
8 Press rt to input the channel
number you want to store.
● To enter the registered station
name (੬ pg. 97), press rt to
select “ID”, then press ENTER. Press rt.
● For fine tuning adjustment, press rt to select “FINE”, then press
ENTER. Press rt to perform fine-tuning.
● When storing a channel that sends scrambled broadcasts, press rt
to select “DECODER”, then press ENTER. Press rt to set
“DECODER” to “ON” (“OFF” is the default setting).
● When “L-2 SELECT” is set to “VIDEO/RGB”, “S-VIDEO/RGB” or
“SAT VIDEO/RGB”, the “DECODER” setting cannot be changed.
(੬ pg. 45)
9 Press ENTER to enter new channel information. The
Confirmation screen appears.
● Repeat steps 4 – 9 as necessary.
10 Press SET UP to close the Confirmation screen.
● When Auto Channel Set is completed, “PLEASE WAIT” will be
displayed for about 90 seconds, since channel data is exchanged
between the DVD deck and the VHS deck. No operations will be done
during this time.
● To change positions, see “Change Station Channel Position”
(
੬ pg. 86).
● If you wish to set station names other than the ones registered in your
unit, see “Set Stations (B)” (੬ pg. 87).
ENTER
VHS
SET UP
A
TTENTION:
Guide Program numbers are not set when channels are stored
manually. (੬ pg. 83, “S
HOWVIEW
TM
System Setup”)
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
SET UP
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
01 25 ARD
02 C08 SKY1
03 10 ZDF
04 C65 DAI1
05 C31 BBC1
06 C32 BBC2
07 C33 3SAT
08 C26 E-SP
09 55 WEST
10 C24 SAT1
11 C23 OSF
12
----
13
----
14
----
PR CH PR CHID
ID
INITIAL SET UP / MANUAL CH SET
RETURN
(Example) To store in position 12.
The programme currently received
on the selected channel position
appears behind the confirmation
screen.
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
SET UP
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
CH
01
----
INITIAL SET UP / MANUAL CH SET
BAND
CH
ID
DECODER
FINE
CC
CH
OFF
RETURN
MV5S_00.book Page 85 Wednesday, August 31, 2005 4:55 PM