Filter
Top Products
EN 17
ACCESS CUSTOM SET
SCREEN
3
Press CH 5
∞
or PUSH
JOG 5
∞
to move the
highlight bar (arrow) to
“CUSTOM SET”, then
press OK.
ACCESS G-CODE SET-UP
SCREEN
4
Press CH
5
∞ or PUSH
JOG
5
∞ to move the
highlight bar (arrow) to
“G-CODE SET-UP”, then
press OK.
ACCESS GUIDE CHANNEL
SET SCREEN
5
Press CH
5
∞
or PUSH
JOG
5
∞
to move the
highlight bar (arrow) to
“GUIDE CHANNEL SET”,
then press OK.
INPUT GUIDE CHANNEL
NUMBER
6
Press CH 5
∞
, PUSH JOG
5
∞
or the appropriate
NUMBER keys to input the
G-CODE Guide Channel
number as shown in the
TV listing. Then press OK.
● If you receive your
channels with a cable
box and if you have
properly set your
Controller, “CABLE CH”
appears in place of “VCR CH”. If not, refer to pages
13–14 and re-perform the procedure.
INPUT RECEIVING CHANNEL
NUMBER
7
Press CH 5
∞
, PUSH JOG
5
∞
or the appropriate
NUMBER keys to input the
number of the channel on
which the GuideChannel’s
broadcasts are received.
Then press OK.
● If there is more than one
mismatch, repeat steps 6
and 7 for each instance.
RETURN TO G-CODE SET-UP
SCREEN
8
Press MENU.
CHECK INPUT DATA
9
Press CH
5
∞ or PUSH
JOG
5
∞ to move the
highlight bar (arrow) to
“GUIDE CHANNEL MAP”,
then press OK.
● The Guide Channel and
VCR or cable box
channel numbers you
input appear on the
screen in ascending
order. Check to ensure
you’ve entered them
correctly.
● If you entered more than
10 sets of numbers, press
OK to see the next set of
numbers.
● Guide Channel Map contains only the Guide Channels
and VCR or CABLE channels that you entered.
RETURN TO NORMAL
SCREEN
10
Press MENU as many times as necessary.
You can now use G-CODE for quick and simple timer
programming (੬ pg. 40).
(Ex.) If WNJU(Ind.) is
received on channel 47
MAIN MENU
PROGRAM SET
FUNCTION SET
TUNER SET
=CUSTOM SET
AUTO PICTURE
VIDEO STABILIZER
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
CUSTOM SET
OVERRIDE
AUTO CLOCK SET
LANGUAGE SELECT
=G-CODE SET-UP
DBS RECEIVER OUTPUT
DBS RECEIVER BRAND SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
GUIDE CHANNEL SET
GUIDE CH : 6
VCR CH : 47
PRESS NUMBER KEY (0-9)
OR (5∞), THEN (OK)
PRESS (MENU) TO END
(Ex.) When inputting the
Guide Channel number
6 for WNJU(Ind.)
G-CODE SET-UP
=GUIDE CHANNEL SET
GUIDE CHANNEL MAP
CABLE BOX OUTPUT
CABLE BOX BRAND SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
GUIDE CHANNEL SET
GUIDE CH : 6
VCR CH : 6
PRESS NUMBER KEY (0-9)
OR (5∞), THEN (OK)
PRESS (MENU) TO END
G-CODE SET-UP
GUIDE CHANNEL SET
=GUIDE CHANNEL MAP
CABLE BOX OUTPUT
CABLE BOX BRAND SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
GUIDE CHANNEL MAP
GUIDE: VCR GUIDE: VCR
6 : 47 10 : 55
12 : 41 15 : 38
33 : 28 67 : 49
PRESS (OK) TO NEXT
PRESS (MENU) TO END