JVC HR-DD840KR VCR User Manual


 
EN 23
0
PLAYBACK AND RECORDING FEATURES
Playback
Features
Still Picture/Frame-By-
Frame Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the CH
5
or
button to correct the picture.
During still picture, the normal (mono) sound from
the previous 3 seconds (approx.) will be played back
repeatedly (provided there was at least 6 seconds of
normal playback prior to engaging the still picture
mode).
"TIMESCAN AUDIO" must be set to "ON", or the
sound will not be heard ( pg. 36).
ACTIVATE FRAME-BY-
FRAME PLAYBACK
2
Turn the JOG dial to the right for forward frame-by-
frame playback, or to the left for reverse frame-by-frame
playback.
OR
Press PAUSE repeatedly to advance one frame at a time.
OR
Press PUSH JOG £ repeatedly for forward frame-by-
frame playback or PUSH JOG repeatedly for reverse
frame-by-frame playback.
To resume normal playback, press PLAY.
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback resumes.
Slow Motion/
Reverse Slow Motion
ACTIVATE SLOW-MOTION
PLAYBACK
1
For hands-free slow-motion, turn the TIME SCAN
SHUTTLE ring one or two positions to the left or press
PUSH JOG during playback to decrease speed in
the forward direction. Continue to turn the TIME SCAN
SHUTTLE ring to the left or press PUSH JOG to
select the two reverse slow motion, reverse play and
reverse search modes.
OR
During still picture, turn the TIME SCAN SHUTTLE ring
to the right for forward slow motion, or to the left for
reverse slow motion.
OR
During still picture, press and hold PUSH JOG £ for
forward slow motion, or press and hold PUSH JOG
for reverse slow motion. Release to return to still picture.
Refer to the chart on pg. 35 for slow motion speeds.
To resume normal playback, press PLAY.
ACTIVATE HIGH-SPEED SEARCH
1
During playback or still, press FF for forward high-speed
search, or REW for reverse high-speed search.
The search speed is 7 times normal playback speed with
SP recordings, and 21 times normal with EP recordings.
TimeScan will be automatically engaged during high-
speed search with an SP-recorded tape.
If during high-speed search the tape speed changes from
SP to EP the search mode will change to EP TimeScan.
Press PUSH JOG for the opposite direction or turn the
TIME SCAN SHUTTLE ring to the opposite direction
during high-speed search of an EP-recorded tape to
change to 7x TimeScan search. ( pg. 34)
To resume normal playback, press PLAY.
High-Speed Search
CH
PLAY
REW
FF
PAUSE
PUSH JOG /£
q
PLAY
PAUSE
CH
JOG
TIME SCAN SHUTTLE