Filter
Top Products
EN 39
12
45
3
6
8
0
7
9
Hi-Fi Audio Recording Level
Control
Your VCR allows manual adjustment of the Hi-Fi audio
recording level. Although the preset audio recording level is
satisfactory for normal recording, if the sound you are going to
record is too loud or too low, adjust the audio recording level
while referring to the VCR's audio level meters.
q
MENU
CH
ACCESS MAIN MENU SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET SCREEN
2
Press CH
5
∞ or PUSH JOG
5
∞ to move the highlight
bar (arrow) to “FUNCTION SET”, then press OK.
ACCESS AUDIO SELECT SCREEN
3
Move the highlight bar (arrow) to "AUDIO SELECT" by
pressing CH 5
∞
or PUSH JOG 5
∞
, then press OK.
ACCESS HI-FI REC LEVEL SCREEN
4
Press CH
5
∞ or PUSH JOG
5
∞ to move the highlight
bar (arrow) to “HI-FI REC LEVEL”, then press OK.
SELECT MODE
5
Move the highlight bar
(arrow) to “MANUAL” by
pressing CH
5
∞ or PUSH
JOG
5
∞.
ADJUST AUDIO RECORDING
LEVEL
6
Press FF or REW.
● To move the on-screen's audio levels by one division
of the scale, press FF or REW briefly for 5 times in
succession. To move the audio levels faster, keep FF
or REW presssed.
● Adjust the recording level while watching the VCR's
audio level meters. Set the level so that maximum
volume causes the meters to vary between 0dB to 4dB.
RETURN TO NORMAL SCREEN
7
Press MENU as many times as necessary to exit.
HI-FI REC LEVEL CONTROL
PRESET
=MANUAL
PRESS PRESS
(REW) (FF)
MIN------
*
------MAX
PRESS (5,
∞
) TO SELECT
PRESS (MENU) TO END
NOTE:
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
OK
CH
REW
FF
MENU
OK
PUSH JOG