JVC HR-DD840KR VCR User Manual


 
8 EN
INITIAL SETTINGS (cont.)
SELECT MODE
5
At the Override Auto
Clock Set screen, move the
highlight bar (arrow) to
“SEMI-AUTO CLOCK SET”
by pressing CH ▲▼ or
PUSH JOG 5
, then press
OK.
ACCESS SELECT SCREENS
6
At the Semi-Auto Clock Set
screen, move the highlight
bar (arrow) to the desired
mode by pressing CH ▲▼
or PUSH JOG
5
, then
press OK.
To select the Host Channel
— step 7
To select the Time Zone — step 8
To select the D.S.T. mode — step 9
NOTE:
The time that has been set previously by the Plug &
Play function will be erased when any of the three
settings mentioned above is changed.
SELECT HOST CHANNEL
7
You can either select
"AUTO", or enter a PBS
channel number. For
automatic selection, press
MENU if "AUTO" is
highlighted on the Host
Channel Select screen. To
manually select "AUTO" or
the PBS channel, press
CH ▲▼ or PUSH JOG 5
to cycle through "AUTO" or
the channel numbers (hold button down to speed
through numbers) and stop when the desired number
appears. Press MENU and the Semi-Auto Clock Set
screen reappears.
NOTES:
For cable box users: Select "AUTO" or the channel
on your VCR that receives the cable box channels,
and set the cable box to the PBS channel.
There are some PBS channels that do not transmit
clock setting data.
Semi-Auto
OVERRIDE AUTO CLOCK SET
AUTO CLOCK SET
=SEMI–AUTO CLOCK SET
MANUAL CLOCK SET
PRESS (5,), THEN (OK)
PRESS (MENU) TO END
SEMI–AUTO CLOCK SET
=HOST CHANNEL SELECT
TIME ZONE SELECT
D.S.T. SELECT
PRESS (5,), THEN (OK)
PRESS (MENU) TO END
HOST CHANNEL SELECT
(CATV)
CH AUTO
PRESS (5,) TO SELECT
PRESS (MENU) TO END
12
45
3
6
8
0
7
9
q
MENU
CH
CH
OK
MENU
OK
PUSH JOG