JVC HR-S7300U VCR User Manual


 
11
9
3
6
8
2
5
7
1
4
0
+
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SELECT D.S.T. MODE
9
You have three choices:
a–Select “AUTO” and the
adjustment to your VCR’s
clock will be made
according to the incoming
signal from the host
channel.
b–Select “ON” and the
adjustment will be made
based on the clock itself.
c–Select “OFF” if Daylight Saving Time doesn’t apply to
you.
Place the arrow next to your choice by pressing SET +/–,
then press MENU and the Semi-Auto Clock Set screen
reappears.
D.S.T. SELECT
=AUTO
ON
OFF
PRESS (SET+/–) FOR CHOICE
PRESS (MENU) TO END
IMPORTANT
After setting the Semi-Auto clock set, make sure that the VCR
is off before the next hour so that the clock can be adjusted.
(The clock is automatically adjusted on the hour except at
11:00 PM, midnight, 1:00 AM and 2:00 AM.)
SELECT MODE
5
At the Override Auto Clock Set screen ( pg. 10), place
the arrow next to “MANUAL CLOCK SET” by pressing
SET +/–, then press SELECT.
SET DATE, TIME AND D.S.T.
6
The Manual Clock Set
screen is displayed and the
first setting that can be set
begins blinking.
Press SET +/– to set the
month, then press SELECT.
The day display begins
blinking. Repeat the
procedure to set the day,
year, hour (including AM/PM), minutes and D.S.T.
(Daylight Saving Time).
As for the D.S.T. setting
a–Set to "ON" and the adjustment will be made based
on VCR's clock.
b–Set to "OFF" if D.S.T. doesn't apply to you.
When you’re finished with this set-up procedure, press
MENU to start the clock.
MAKE CORRECTIONS
7
To change any of the settings, press SELECT until the
item you want to change blinks, then set as in step 6.
MANUAL CLOCK SET
DATE 1/ 1/96 MON
TIME – – : – – AM
D.S.T. ON
PRESS (SELECT, SET+/–)
PRESS (MENU) TO END
Manual
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
SELECT MODE
5
At the Override Auto Clock Set screen, place the arrow
next to "AUTO CLOCK SET" by pressing SET +/–, then
power off the VCR. Do not power it on again until the
clock has been adjusted. The clock is automatically
adjusted on the hour except at 11:00 PM, midnight,
1:00 AM and 2:00 AM. (The clock will be adjusted on
the hour based on the time displayed on the VCR, not
on the actual real time.)
Auto
MENU
SELECT
DIGIT
MENU
SELECT
SET
SET