Filter
Top Products
24
Simple
Recording
LOAD A CASSETTE
1
Make sure the record safety tab is intact. If not, cover the
hole with adhesive tape before inserting the cassette.
● If you use the RF connection, by pressing the TV/VIDEO
button, select VIDEO mode to view the program to be
recorded.
SELECT RECORDING
CHANNEL
2
Press CH+/–. Or press the appropriate DIGIT keys, then
press ENTER. (The channel changes after a few seconds
whether you press ENTER or not.)
SET TAPE SPEED
3
Press SP/EP to set the recording speed.
START RECORDING
4
Press and hold REC and press PLAY on the remote
control, or press REC on the VCR's front panel.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
● During record pause, you can change the recording
channel by using the CH+/– buttons or DIGIT keys.
STOP RECORDING
6
Press STOP or STOP/EJECT. Then press STOP/EJECT to
remove the cassette.
● To prevent accidental recording on a recorded cassette,
remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab
Accidental erasure prevention
SIMPLE PLAYBACK AND RECORDING (cont.)
9
3
6
8
2
5
7
1
4
0
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
STOP
STOP/EJECT
PLAY
PAUSE
REC
DIGIT
SP/EP
ENTER
REC
PAUSE
CH
CH
SP/EP
TV/VIDEO
TV/VIDEO
PLAY