Filter
Top Products
40
9
3
6
8
2
5
7
1
4
0
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
VCR Plus+
Timer
Programming
TIMER RECORDING (cont.)
Before VCR Plus+ Timer programming, see "VCR Plus+
Setup" on page 20.
Timer recording allows you to program the VCR to automati-
cally record a program which will be broadcast at some future
time. The timer record function can be programmed using VCR
Plus + or On-Screen Timer Programming (੬ pg. 42).
LOAD A CASSETTE
1
Make sure the record safety tab is present.
● The VCR’s power comes on automatically.
ACCESS VCR PLUS+ SCREEN
2
Press MENU on the remote
control.
● The clock must be set in
order to access the VCR
Plus+ screen. If you
haven’t set the clock, the
Main Menu screen
appears when you press
MENU. Refer to page 8 for the Advanced Auto Clock
Set procedure or page 9 for the clock setting
procedure.
ENTER PLUSCODE NUMBER
3
Press the appropriate DIGIT keys to enter the PlusCode
number printed in the TV listings for the TV program
you wish to record.
● To make corrections, press CANCEL and input the
correct PlusCode number.
● If the PlusCode number you input is incorrect,
"ERROR" may appear on the screen to advise you of
the error. This happens when the PlusCode number is
for a program which has already passed. "ERROR" is
displayed for about 4 seconds and the VCR Plus+
screen reappears (step 2).
CHECK INPUT DATA
4
Press SELECT and the
Program screen appears.
The PlusCode number you
entered appears in the
Program screen. Check to
make sure it’s accurate.
● To timer-record daily or
weekly serials, press
DAILY (DIGIT “8”) or WEEKLY (DIGIT “9”). “DAILY”
or “WEEKLY” appears on the Program screen.
● For weekly recording, the desired date for the day of
the week must be entered.
● If you made a mistake, press CANCEL and, after
pressing MENU as many times as necessary to access
the VCR Plus+ screen, input the correct PlusCode
number.
SET TAPE SPEED
5
Press SP/EP.
VCR PLUS+
PRESS (DIGIT)
THEN PRESS (SELECT)
PRESS (MENU) TO MAIN MENU
PROGRAM 1
(VCR PLUS+ 12345678)
DATE 7/10 FRI
START 8:00 PM
STOP 9:00 PM
CHANNEL 8 SP
PRESS (8=DAILY, 9=WEEKLY
SP/EP=REC SPEED)
PRESS (MENU) TO END
DIGIT
SP/EP
CANCEL
SELECT
DIGIT "8"
DIGIT "9"
MENU
SP/EP
SELECT