JVC HR-S9400EE VCR User Manual


 
18 EN
Spatializer
This feature expands sound field when you play back any stereo
source or view a stereo programme while recording it.
*Spatializer
has no effect on recording quality.
PLAYBACK (cont.)
8
••
••
••
••
••
••
ACTIVATE SPATIALIZER
1
Press SPATIALIZER; the current setting will be displayed
on the screen for about 5 seconds. Pressing
SPATIALIZER while the screen shows the display
changes the setting.
To view a stereo programme such as movies or
music, select "SPATIALIZER " to create more
spacious sound.
To view a monaural programme, select
"SPATIALIZER[ST" which simulates a stereo effect.
Select "SPATIALIZER OFF" to turn off Spatializer
if
the sound becomes unnatural with either
"SPATIALIZER " or "SPATIALIZER[ST" selected.
If your TV is equipped with 3D-PHONIC and if you
use both Spatializer
and 3D-PHONIC at the same
time, the sound may become unnatural; set either
function to "OFF".
The setting will remain effective even though you
turn on/off the recorder.
NOTES:
Spatializer
is effective only with a stereo TV.
You can change the Spatializer
setting even though "O.S.D."
is set to "OFF".
The setting cannot be changed during search, still, frame-by-
frame playback or slow motion mode.
When this recorder is used as the player for editing, the
recorded audio will correspond to the Spatializer
setting.
12
45
3
6
8
0
7
9
2
4
1
3
C.MEMORY
A/B CODE
FF
C.RESET
REW
AUDIO MONITOR
STOP
SCENE FINDER
STOP/EJECT
REW
FF
SPATIALIZER
Soundtrack Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO MONITOR ( ) changes the soundtrack being played back as follows:
TRACK
Recorder's Front Panel On-Screen Display
USE
L + R HI FI For Hi-Fi stereo tapes
LR
L HI FI For main audio of Bilingual tapes
L
R HI FI For sub audio of Bilingual tapes
R
NORM NORM For audio-dubbed tapes
L + R + NORM HI FI For audio-dubbed tapes
NORM
NOTES:
"L + R" should normally be selected. In
this mode, Hi-Fi stereo tapes are played
back in stereo, and the NORM track is
played back automatically for tapes
with only normal audio.
"O.S.D." must be set to "ON" or the
on-screen displays will not appear
(
pg. 13).