Filter
Top Products
44 EN
Insert editing replaces part of the recorded scene with new
material. Both the picture and Hi-Fi audio soundtrack are
replaced with new ones, while the normal audio soundtrack
remains unchanged. If you wish to change the normal audio
track as well, use the audio dubbing function simultaneously.
Use your video recorder as the recorder.
Insert Editing
EDITING (cont.)
MAKE CONNECTIONS
1
Connect the player's VIDEO OUT and AUDIO OUT
connectors to your recorder's VIDEO IN and AUDIO IN
on the front panel.
SET INPUT MODE
2
Press NUMBER key "0" or TV PROG so that "F-AU"
appears in place of a channel number.
● Refer to "To Select The External Input Mode" on page
39.
LOCATE END POINT
3
Load the recording cassette into your recorder, and play
it back to determine the edit-out point (the end of the
segment to be replaced) using the JOG/TIME SCAN
SHUTTLE controls or PUSH JOG and PAUSE.
RESET THE COUNTER
4
Press C.RESET to change the counter display to "0:00:00".
LOCATE START POINT
5
Determine the edit-in point (the beginning of the
segment to be replaced) using the JOG/TIME SCAN
SHUTTLE controls or PUSH JOG and PAUSE.
● Be sure to engage the Still mode at the edit-in point.
Before insert editing
After insert editing
Source tape
Recorded tape
Normal audio
track
Video/Hi-Fi
audio track
fi
%
fi
%
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
Recorder Your recorder
JOG
TIME SCAN SHUTTLE
PAUSE
Audio/Video signal
Another recorder
Player
Set the REC SYSTEM switch to the appropriate position.
(
੬ pg. 27)
12
45
3
6
8
0
7
9
2
4
1
3
NUMBER "0"
PUSH JOG
C.RESET
PAUSE
TV PROG