Filter
Top Products
42 EN
You can use a camcorder as the source player and your video
recorder as the recorder.
Edit From A
Camcorder
MAKE CONNECTIONS
1
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/VIDEO
input connectors.
● When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO IN L input
connector on your recorder.
● When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder’s instruction manual
for operating procedure.
SET RECORDER’S INPUT
MODE
2
Press NUMBER key “0” or TV PROG so that “F-AU”
appears in place of a channel position number.
● Refer to "To Select The External Input Mode" on page
39.
SET EDIT MODE
3
See "Editing Mode Setting" on page 38.
START CAMCORDER
4
Engage its Play mode.
START RECORDER
5
Engage its Record mode.
EDITING (cont.)
NOTE:
Be sure to set "EDIT" back to "OFF" when you finish editing.
(
੬
pg. 38)
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
AUDIO OUT
VIDEO OUT
EDIT
VIDEO
input
AUDIO
input
Mini-Plug Cable
(not provided)
(JVC camcorder
only)
Recorder
Audio Cable (provided)
Video Cable (Not provided)
Player
Camcorder
To rear panel PAUSE/
R.A.EDIT connector
Set the REC SYSTEM switch to the appropriate position.
(
੬ pg. 27)
12
45
3
6
8
0
7
9
2
4
NUMBER "0"
TV PROG