JVC HR-VP830U VCR User Manual


 
25
SIMPLE PLAYBACK AND RECORDING
Simple
Playback
LOAD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointing towards the VCR. Don’t apply too much
pressure when inserting.
The VCR’s power comes on automatically.
The counter is automatically reset to "0H 00M 00S".
If the cassette's record safety tab has been removed,
playback begins automatically.
FIND PROGRAM START
POINT
2
If the tape is advanced past the start point, press REW
or turn the TIME SCAN SHUTTLE ring to the left. To go
forward, press FF or turn the TIME SCAN SHUTTLE ring
to the right.
START PLAYBACK
3
Press PLAY. "VIDEO CALIBRATION" appears on screen
( pg. 40).
STOP PLAYBACK
4
Press STOP or STOP/EJECT. Then press STOP/EJECT
to remove the cassette.
Before performing the following steps, make sure the TV is set
to the VCR channel (3 or 4) or AV mode.
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T-90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
* Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
**This video recorder can record on regular VHS and
Super VHS cassettes. However, it will record and play
back regular VHS signals only. It is not possible to play
back Super VHS recordings.
Usable cassettes
12
45
3
6
8
0
7
9
8
••
••
••
FF (Fast-Forward)
REW (Rewind)
PLAY
STOP
TIME SCAN SHUTTLE
PLAY
STOP/EJECT
REW
FF