Filter
Top Products
36
PLAYBACK AND RECORDING FEATURES (cont.)
● The VCR's TimeScan indicator lights during TimeScan.
● The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.
● The TimeScan search speed is the same for SP and EP recordings.
● To resume normal playback, press PLAY.
● When using the VCR's TIME SCAN SHUTTLE ring, the playback speed may not change depending on how far it is turned.
● When using the VCR's TIME SCAN SHUTTLE ring, the playback speed will change up to X7 and -X7 search speeds. Turning
the TIME SCAN SHUTTLE ring further will not increase the search speed.
● Picture may be distorted at the position where the recording speed is switched.
● The picture may be noisy for a moment when you change the playback speed.
● Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
● Picture may appear distorted in comparison to normal playback.
● In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
● TimeScan sound quality will differ in comparison to normal playback.
● When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
Speed
Names of
special-effects
playback
Audio output
* Still mode cannot be engaged using the remote control's TIME SCAN button.
PLAY
VCR's Time
Scan shuttle
indicator
12
45
3
6
8
0
7
9
SKIP SEARCH
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press SKIP SEARCH 1 to 4 times during playback. Each
press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search,
press PLAY.
TimeScan
Reverse Forward
Search Play Slow-Motion *Still Slow-Motion Play Search
X-7 X-5 X-3 X-1 X-1/6 X -1/18 0 X1/18 X1/6 X1 X2 X3 X5 X7
SEARCH SLOW 6 SLOW SEARCH
Orange Green Red Green Orange
Audio is output. Audio is not output. Audio is output.