Filter
Top Products
21
Operation
Slow Motion
1. While in still mode, press FF (M). The tape
is played at a speed 1/19 times slower than
the normal speed.
2. Use CH -/+ on the Remote Control if neces-
sary to adjust the tracking.
3. To return to the normal speed, press PLAY
(N).
Notes:
• During slow motion, audio is muted and horizontal
lines (noise bars) may appear on the TV screen. This
is normal.
• After 3 minutes in SLOW MOTION mode the
DVD+VCR goes back to PLAY mode to protect the
tape and video heads.
CM SKIP (Commercial Skip)
This feature is useful for skipping commercials or
short program segments.
1. Press in playback mode.
The DVD+VCR performs a fast forward picture
search through 30 seconds of recording.
2. Press again to extend the search time by
an addition 30 seconds. The maximum search
time is 3 minutes.
3. When the search is complete, the DVD+VCR
goes into playback mode automatically.
VHS Hi-Fi Stereo / MTS
VHS Hi-Fi Stereo / MTS
Broadcast
Broadcast
This DVD+VCR is equipped with the VHS Hi-Fi
audio sound system for recording and playback.
The information below gives a brief description of
Hi-Fi audio and how to record and play a tape in
the Hi-Fi audio mode.
Hi-Fi Stereo Audio Sound
A stereo TV with AUDIO/VIDEO input jacks or a
stereo audio system is required for true stereo
playback. To experience the full and rich stereo
sound available with Hi-Fi recorded tapes, we rec-
ommend the connection of this unit to a home
stereo audio system.
1. Set the AUDIO MODE option to HI-FI on the
VCR SETUP menu.
2. Set the AUDIO OUTPUT option to STEREO
so that the left channel sound (L) is heard from
the left speaker and the right channel sound
(R) is heard from the right speaker.
The other options are (LEFT) POSITION,
which results in the left channel sound (L)
being heard from both speakers or (RIGHT)
POSITION, which results in the right channel
sound (R) being heard from both speakers.
3. Insert a cassette and press PLAY (N).
Note:
If playing back a HI-FI tape produces noisy audio, man-
ually change the menu setting from HI-FI to NORMAL.
MTS (Multi-Channel TV Sound)
This DVD+VCR can decode MTS stereo and bilin-
gual (SAP) off-the-air broadcast sound signals. It
also decodes stereo TV sound from local cable
companies as long as they operate on assigned
cable frequencies and use the EIA-recommended
MTS stereo/bilingual TV sound system.
Multichannel TV Sound Indicator (MTS)
When you press ENTER / OK one or both of the
indicators appears on the TV Screen.
STEREO
The DVD+VCR can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE
option is in the STEREO position. The DVD+VCR
can also record mono audio onto the mono audio
track.
SAP
Some stations transmit a Second Audio Program,
which is used for a second language or additional
information.
STEREO/SAP
Use the BROADCAST TYPE option to select the
desired recording mode (STEREO or SAP).