Filter
Top Products
27
Operation
Playing a DVD or V
Playing a DVD or V
ideo CD
ideo CD
Playback Setup
1. Turn on the TV and select the video input
source connected to the DVD+VCR.
2. Turn on the audio system (if applicable) and
select the input source connected to the
DVD+VCR.
3. Press OPEN/CLOSE (Z) to open the disc tray
and load your chosen disc in the tray, with the
playback side down.
4. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press PLAY (N).
In some cases, the disc menu might appear
instead.
5. To stop the playback, press STOP (x).
The unit records the stopped point, depending
on the disc. “
X
x” appears on the screen
briefly. Press PLAY (N) to resume playback
(from the scene point). If you press STOP (x)
again or unload the disc (“x” appears on the
screen.), the unit will clear the stopped point.
Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER 1/:, the disc tray closes auto-
matically and unit turns off.
If a menu screen is displayed
The menu screen may be displayed first after
loading a DVD which offer a menu.
Use the b B v V buttons to select the
title/chapter you want to view, then press
ENTER / OK to start. Press TITLE or DISC
MENU to return to the menu screen.
Use the number buttons to select the track you
want to view and press RETURN to return to
the menu screen. Menu settings and operating
procedures may differ. Follow the instructions
on each menu screen. You also may set PBC
to Off (See “PBC” on page 19).
Note:
DVDs may have a region code. Your player will not play
discs that have a region code different from your player.
The region code for this player is 1 (one).
General Features
Note:
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
able on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can
move to another title. Press DISPLAY and select
desired title by using number (0-9) or b / B then
press ENTER / OK to move to another title.
Moving to another CHAPTER
When a title on a disc has more than one chapter,
you can move to another chapter as follows:
• Press SKIP (> or .) briefly during play-
back to select the next chapter or to return to
the beginning of the current chapter.
• Press SKIP (.) twice in quick successions
to step back to the previous chapter.
• To go directly to any chapter during DVD play-
back, press DISPLAY and press v / V to
select the chapter icon. Input the chapter num-
ber (0-9) or use b / B.
Slow Motion
1. Press PAUSE (X) during playback.
The DVD+VCR will now go into PAUSE mode.
2. Use FF (M) to select the required speed: T
1/7, T 1/6, T 1/4, or T 1/2 (forward).
3. To exit Slow Motion mode, press PLAY (N).
Note:
Slow motion playback in reverse is not possible.
VCDDVD
VCDDVD
DVD
VCD
DVD