7
Introduction
Regional Code
This DVD+VCR is designed
and manufactured for playback
of region “1” encoded DVD
software. This unit can play
only DVD discs labeled “1” or “ALL”.
Notes on Regional Codes
• Most DVD discs have a globe with one or
more numbers in it clearly visible on the cover.
This number must match your DVD+VCR’s
regional code or the disc cannot play.
• If you try to play a DVD with a different region
code from your player, the message “Check
Regional Code” appears on the TV screen.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copy-
righted material without permission.
This product features the copy protection function
developed by Macrovision. Copy protection sig-
nals are recorded on some discs. When recording
and playing the pictures of these discs picture
noise will appear. This product incorporates copy-
right protection technology that is protected by
method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be author-
ized by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly
is prohibited.
Notice for Progressive Scan Use
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DIS-
PLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS,
IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STAN-
DARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COM-
PATIBILITY WITH THIS MODEL 525p
DVD+VCR, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
About the Remote Control
Operation Range
Point the Remote Control at the remote sensor
and press the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Angle: About 30° in each direction of the front of
the remote sensor.
Battery installation
Detach the battery cover on the rear
of the Remote Control, and insert
two (R03/AAA) size batteries with 3
and # aligned correctly.
Do not mix old and new batteries and
never mix different types of batteries such
as standard, alkaline, etc.
Selecting the Viewing Source
You must select one of your output sources (DVD
or VCR) to view on the TV screen.
• If you want to view DVD deck output source:
Press DVD until DVD indicator in the display
window lights and output source of DVD deck
is viewed on the TV screen.
• If you want to view VCR deck output source:
Press VCR until VCR indicator in the display
window lights and output source of VCR deck
is viewed on the TV screen.
Notes:
• If you insert a disc while the DVD+VCR is in the
VCR mode, the DVD+VCR will switch to DVD mode
automatically.
• If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode automatically.
• To selecting and viewing the E to E sources (tuner,
line1, line2), the unit must be in VCR mode.
1
ALL
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Labora-
tories.
DTS and DTS Digital Out are trademarks
of Digital Theater Systems, Inc.
This model is equipped with SQPB (S-VHS
QUASI PLAYBACK) that makes it possible
to play back S-VHS recordings with regu-
lar VHS resolution.