JVC HR-XVC18BUS DVD VCR Combo User Manual


 
26
Additional VCR Information
Additional VCR Information
During manual recording, timer recording,
Instant Timer Recording, playback, or fast for-
ward modes, the DVD+VCR automatically
starts rewinding the tape at the end of the tape.
The cassette stops at the beginning of the tape
and is ejected.
After you have finished using the DVD+VCR,
rewind, eject, and remove the cassette. Place
the cassette in its protective sleeve to protect it
from dust. It is not necessary to rewind the cas-
sette before removing it, but if you do, it is
ready to play or record the next time you use it.
Be sure the DVD+VCR channel selector is on
the correct channel you wish to record. The
channel that is being recorded can always be
checked by setting the television on the
DVD+VCR channel (CH 3 or 4) and pressing
the TV/VCR to turn the DVD+VCR’s TV indi-
cator off.
Do not attempt to hook up more than one tele-
vision set to the DVD+VCR for either record-
ing or playback.
VCR Auto Play System
This DVD+VCR features automatic playback.
When you load a tape with the safety tab removed
the following occurs:
The Output Source is changed to VCR mode
automatically.
The power turns on automatically and playback
begins.
At the end of the tape, the DVD+VCR stops, then
rewinds.
The tape is ejected after rewinding and the turns
itself off automatically.
Note:
Auto power off does not function during regular DVD
play mode. (DVD+VCR power stays on.)
S-VHS Quasi Playback (SQPB)
This DVD+VCR can play back S-VHS record-
ed tapes, however, it cannot record video on
S-VHS format.
SQPB is an abbreviation for S-VHS Quasi
Playback.
Note:
Playback picture of SQPB may be distorted in the fol-
lowing cases:
When starting playback.
When changing the playback mode between for-
ward or reverse picture search and normal play-
back.
When changing the operating deck (VCR or DVD).
Easy Information
If the Extended Data Service (XDS) signals are
provided along with normal TV signal in your area
or during playback of a tape recorded with
Extended Data Service (XDS) signals, the station
ID, program title, and program details are shown
on the TV screen. When viewing a channel with
Extended Data Service (XDS) signals, press
ENTER / OK and the station ID will appear on the
TV screen. Press ENTER / OK again and the pro-
gram details will appear on the TV screen.
When viewing a tape recorded with Extended
Data Service (XDS) signals, press ENTER / OK
twice and the program title and program details
will appear on the TV screen.
Program Details
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of
a program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated).
The rating N/A means that the motion picture ratings
are not applicable to this program.
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
CH 4
SP WABC STEREO
“Home video”
APR 30 , SAT 2:15 PM
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A