JVC HR-XVC29SU DVD VCR Combo User Manual


 
Masterpage:Right-No-Heading
EN 27
Filename [XVC2829US_07S-VHS.fm]
Page 27 8 December 2004 9:56 am
Playback Features
Still Picture/Frame-By-Frame
Playback
1 Pause during playback.
Press 9 PAUSE.
If there is vertical jitter, press CH +/– on the Remote or on the
unit to correct the picture.
2 Activate frame-by-frame playback.
Press 9 PAUSE to advance a still picture.
Slow Motion
1 Pause during playback.
Press 9 PAUSE.
2 Activate slow motion playback.
Press and hold 9 PAUSE for 2 seconds, then release.
Press 9 PAUSE and release again to return to still picture.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press CH + or on the Remote or on the unit to
eliminate the noises.
Variable Speed Search
During playback, press FF 5 for forward variable
speed search, or 3 REW for reverse variable speed
search.
The speed changes for each direction by pressing 3 REW
and FF 5 repeatedly.
When pressing FF 5:
(SP): +5x{+7x
(EP): +11x{+21x
When pressing 3 REW:
Once 3 REW is pressed, reverse search starts in 1x normal
playback speed. After this process, each press of 3 REW
changes the search speed between 5x and 7x in SP mode,
11x and 21x in EP mode.
(SP): 1x]5x{7x
(EP): 1x]11x{21x
Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch on the Remote to the
right.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
the picture will be distorted.
the noise bars will appear.
there may be a loss of color.
you cannot hear the sound.
3
PLAY
FF
¡
1
REW
CH +/
8
PAUSE
CH +/
3
PLAY
FF
¡1
REW
Slide to the
right.
To resume normal playback, press 4 PLAY.
XVC2829US_01.book Page 27 Wednesday, December 8, 2004 10:48 AM