JVC HR-XVC29SU DVD VCR Combo User Manual


 
Filename [XVC2829US_10Subsidiary.fm]
Masterpage:Left+
60 EN
Page 60 8 December 2004 10:32 am
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.
8 VIDEO STABILIZER
ON
OFF
When this function is set to ON, you can automatically correct vertical
vibration in the picture when playing back unstable recordings made on
another recorder.
NOTES:
When you finish viewing a tape, be sure to set this function to OFF.
Regardless of the setting, this function has no effect during recording and during special
effects playback.
The on-screen display may jitter vertically when this function is set to ON.
To watch recordings with close-caption, set this function to OFF.
8 BLUE BACK
ON
OFF
When this function is set to ON, the TV screen becomes all blue when
receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set this function to
OFF.
8 2ND AUDIO RECORD
ON
OFF
When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on both the normal and
Hi-Fi tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on both the Hi-Fi
and normal tracks.
When this function is set to “OFF,” the SAP audio cannot be recorded.
NOTES:
When the channel is changed on the unit;
The STEREO indicator appears on the screen for about 5 seconds if the program is a
stereo broadcast.
The SAP indicator appears on the screen for about 5 seconds if the program is a SAP
broadcast.
Both indicators appear when a stereo program is accompanied by SAP sound.
8 AUDIO MONITOR
HI-FI
HI-FI L
HI-FI R
NORM
MIX
This unit can record two sound tracks simultaneously (normal and Hi-Fi) on a
Hi-Fi stereo tape. You can select the sound track(s) to listen to while playing
back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape
containing two separate audio programs on the Hi-Fi tracks, you can choose
either one by selecting either HI-FI L or HI-FI R.
HI-FI: Normally select this. Hi-Fi sound is played back.
HI-FI L: Sound on the left Hi-Fi channel is played back.
HI-FI R: Sound on the right Hi-Fi channel is played back.
NORM: Sound on the normal track is played back.
MIX: Both sounds on the Hi-Fi track and normal track are mixed
and played back.
NOTES:
While playing back a monaural tape, sounds on the normal track will be heard
regardless of this setting.
You can also use the A.MONITOR button on the Remote to select the desired monitor
sound. (
pg. 30)
8 AUTO POWER OFF
3H
OFF
When this function is set to 3H, the unit is turned off automatically if no
operation is done within 3 hours. AUTO POWER OFF IN 3 MIN appears on
the screen 3 minutes before the unit is turned off.
XVC2829US_01.book Page 60 Wednesday, December 8, 2004 10:48 AM